| Issue |
MATEC Web Conf.
Volume 315, 2020
International Scientific Practical Conference “Materials science, shape-generating technologies and equipment 2020” (ICMSSTE 2020)
|
|
|---|---|---|
| Article Number | 07009 | |
| Number of page(s) | 9 | |
| Section | Building Materials, Properties, Technologies, Equipment | |
| DOI | https://doi.org/10.1051/matecconf/202031507009 | |
| Published online | 01 July 2020 | |
Use of glass granules to produce effective gypsum composites
1 TSTU, Production of building materials and structures Department, 170026, Tver, Russia
2 MGSU,Binders and concretes Department, 129337, Moscow, Russia
* Corresponding author: tanovi.69@mail.ru
The possibility of using glass hollow microspheres in self-reinforced gypsum composites in the work is investigated. The need to use microspheres for gypsum products is dictated by modern high requirements for safety and environmental protection to construction sites and the building materials industry. The dispersion characteristics and grain composition of Russian production glass hollow microspheres, as well as the main component, a gypsum binder, were studied. It was established that all compositions contain particles of micro- and nanometer size. It is shown that glass microspheres provide the structure of a composite with a hardened matrix a low density while maintaining the necessary strength without the introduction of expensive and environmentally unsafe chemical additives.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.