| Issue |
MATEC Web Conf.
Volume 315, 2020
International Scientific Practical Conference “Materials science, shape-generating technologies and equipment 2020” (ICMSSTE 2020)
|
|
|---|---|---|
| Article Number | 01006 | |
| Number of page(s) | 5 | |
| Section | Materials Science and Physical Chemistry of Materials | |
| DOI | https://doi.org/10.1051/matecconf/202031501006 | |
| Published online | 01 July 2020 | |
Investigation of the effect of implantation with iron ions on the carbon content in the implanted layer of structural and instrumental materials
Moscow Polytechnic University, 38 B, Semenovskaya st., Moscow, 107023, Russian Federation
* Corresponding author: uchevatkina@yandex.ru
As part of the ongoing research, iron ions were implanted with targets from armco iron, steels 10, 45, U8 and 30KhGSN2A with a dose of 5 1017 ion / cm2. Implantation was performed under the conditions of an “oil-free vacuum” obtained through the use of modern turbomolecular pumps. It is shown that for tool steels with a carbon content of 0.8–1.2 mass. % the concentration of free carbon in the implanted layer does not exceed 5 at. %, and for carbon steels upon implantation with a two-component ion beam of copper and lead, the concentration of free carbon in the surface layer does not exceed 5 at. %.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.