| Issue |
MATEC Web Conf.
Volume 297, 2019
X International Scientific and Practical Conference “Innovations in Mechanical Engineering” (ISPCIME-2019)
|
|
|---|---|---|
| Article Number | 05012 | |
| Number of page(s) | 6 | |
| Section | The Strengthening Technologies and Functional Coverings | |
| DOI | https://doi.org/10.1051/matecconf/201929705012 | |
| Published online | 13 November 2019 | |
Investigation of the influence of the geometrical dimensions of the striker on the efficiency of energy transfer of shock pulses during wave strain hardening
1
Vice Rector for Prospective Development, BSTU, 241035 Bryansk, Russia
2
MET Department, VLSU, 600000 Vladimir, Russia
* Corresponding author: avk@tu-bryansk.ru
The article presents data on the influence of the geometric parameters of a flat-faced rod shock system on the efficiency of a shock pulse energy transfer to the deformation zone during wave strain hardening. As a result of the simulation, it was found that an increase in the ratio of the striker length to its diameter from 0.1 to 10 allows transferring 15.6 times more shock pulse energy to the deformation area. Changing the ratio of the lengths of the striker and the waveguide from 0.1 to 10 increases the share of the transmitted shock pulse energy by 2.8 times.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.