| Issue |
MATEC Web Conf.
Volume 297, 2019
X International Scientific and Practical Conference “Innovations in Mechanical Engineering” (ISPCIME-2019)
|
|
|---|---|---|
| Article Number | 05008 | |
| Number of page(s) | 9 | |
| Section | The Strengthening Technologies and Functional Coverings | |
| DOI | https://doi.org/10.1051/matecconf/201929705008 | |
| Published online | 13 November 2019 | |
Automation of Operations Design for Complex-Shaped Surfaces Processing
1
Altai State Technical University, 656038 Barnaul, 46 Lenina st., Russian Federation
2
Czestochova University of Technology, 21, Al.Armii Krajowej, 42-201 Czestonchowa, Poland
* Corresponding author: margarita-markova@inbox.ru
Research work is aimed at modeling the process of milling surfaces of complex shape in automated CAD/CAM systems. To reduce labour input of this process, an algorithm for designing milling operations is proposed. The algorithm is implemented in the form of software written in the VBA programming language from Office Excel. The software allows to select cutting tools and cutting modes for roughing, semi-finishing and finishing milling. The initial data for this are: processed material, part configuration, profile depth, technical requirements on the surface. The work of the algorithm was tested on the parts of the mold type. It is found that the set of cutting tools for all types of milling surfaces of complex shape is selected taking into account the overall dimensions of the treated surface, its curvature and radii of surfaces rounding. The results of simulation of mold processing in Sprut CAM system according to the assigned set of cutting tools and cutting modes allowed to choose the tool path with minimal processing time.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.