Issue |
MATEC Web Conf.
Volume 297, 2019
X International Scientific and Practical Conference “Innovations in Mechanical Engineering” (ISPCIME-2019)
|
|
---|---|---|
Article Number | 04007 | |
Number of page(s) | 9 | |
Section | Nanotechnologies and Materials Science in Mechanical Engineering | |
DOI | https://doi.org/10.1051/matecconf/201929704007 | |
Published online | 13 November 2019 |
Mechanisms of technical ceramic density adjusting
1
Belarusian National Technical University, Minsk, Republic of Belarus
2
The John Paul II Catholic University of Lublin, Stalowa Wola, Poland
3
Rzeszów University of Technology, Rzeszów, Poland
4
T.F. Gorbachev Kuzbass State Technical University, 650000 Kemerovo, 28 Vesennyaya st., Russian Federation
* Corresponding author: panteleyenko@inbox.ru
In this paper authors overviewed the most important stages of ceramics production process which give significant influence on final properties of product. Often density and porosity on the all producing stages determines exploitation ceramics properties. A calculation method for fractions ratio selection which provides optimal density is suggested here. Also, density changes during operations of grinding, forming, thermal treatment and sintering a row of specimens are researched and analysed. The data received allow to predict semi products size behaviour while producing and get definite final part with dimension required.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.