| Issue |
MATEC Web Conf.
Volume 297, 2019
X International Scientific and Practical Conference “Innovations in Mechanical Engineering” (ISPCIME-2019)
|
|
|---|---|---|
| Article Number | 09005 | |
| Number of page(s) | 6 | |
| Section | Processes Abrasive Machining, Abrasive Tools and Materials | |
| DOI | https://doi.org/10.1051/matecconf/201929709005 | |
| Published online | 13 November 2019 | |
The Influence of the Formulation Components and the Mixing Technology on Physical and Mechanical Properties of Abrasive Wheel
T.F. Gorbachev Kuzbass State Technical University, 28 Vesennyaya, Kemerovo, 650000, Russia
* Corresponding author: shdb.tm@kuzstu.ru
The influence of the components of the abrasive tool formulation and the technology of mixing the components on physical and mechanical properties is discussed in the article. The technology for the manufacture of a ceramic-bond abrasive tool is presented. The main factors that determine the properties of an abrasive tool are described. The data used in the calculation of the formulation are analyzed, such as: type of abrasive material, grain size, hardness, type of bond, structure, filler. The importance of the process of mixing components of grinding tools at the stage of their manufacture is substantiated.The generalized statistical models of the dependence of physical and mechanical properties on the components of the formulation are presented. The model describing the abrasive mixing process is developed. Based on the results obtained, conclusions are formulated in the form of practical recommendations for improving the properties of the abrasive wheel based on the selection of the components of the formulation and the technology of their mixing.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.