| Issue |
MATEC Web Conf.
Volume 297, 2019
X International Scientific and Practical Conference “Innovations in Mechanical Engineering” (ISPCIME-2019)
|
|
|---|---|---|
| Article Number | 05002 | |
| Number of page(s) | 7 | |
| Section | The Strengthening Technologies and Functional Coverings | |
| DOI | https://doi.org/10.1051/matecconf/201929705002 | |
| Published online | 13 November 2019 | |
Estimates of Metal Deformability
1
Institute of Strength Physics and Materials Science SB RAS, 634055, Akademicheskii pr., 2/4, Tomsk, the Russian Federation
2
Tomsk State University of Architecture and Building, Tomsk, the Russian Federation
* Corresponding author: zharmukhambetova@gmail.com
This paper is devoted to the study of the laws of the deformation behavior of metals, determined by carrying out standardized uniaxial tensile tests. The distribution of various strength grade metals by strain resistance was analyzed. It was taken into account that in the thermodynamic aspect the deformation process is a dissipative effect. In that regard, the magnitude of deformation work, determined by the area of the tension diagram, serves as a basis for assessing the deformability criteria of metals. It was found, that the normalized specific work of deformation linearly increases with strength. As well as it was established that localization of plastic flow is related directly to the characteristics of the tension diagram under solid deformation. In the applied aspect, the numerical values of the compliance criterion can be used to predict the materials behavior of different strength grade during mechanical processing (metal forming and cutting) or operation.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.