| Issue |
MATEC Web Conf.
Volume 297, 2019
X International Scientific and Practical Conference “Innovations in Mechanical Engineering” (ISPCIME-2019)
|
|
|---|---|---|
| Article Number | 01005 | |
| Number of page(s) | 5 | |
| Section | Innovative Technological Processes of the Machine Parts Production, Assembly and Procuring Production | |
| DOI | https://doi.org/10.1051/matecconf/201929701005 | |
| Published online | 13 November 2019 | |
Study of the Assembly Manufacturing Automated Traceability System Identification Tools
1
Volzhsky Polytechnic Institute (Branch) of the Volgograd State Technical University, 404121 Volzhsky, 42A Engelsa str. Russian Federation
2
The limited liability company “Volgopromavtomatika”, 404131 Volzhsky, Mira st. 53b, the Russian Federation
* Corresponding author: aa_silaev@mail.ru
This paper considered questions of quality control of production at assembly manufacturing using an automated traceability and identification system. The main possibilities of these systems are: control of the movement of materials, components and products within the production; construction the technological route and control over the accuracy of its compliance; identification all operations with a binding to the operators. Also authors are carried out the review of problems that can be solved by these systems. As one of the methods of identification of materials, components and products, the technology of using RFID-tags are considered. The main characteristics of RFID tags have analyzed (frequency of work, design, power supply). Advantages and disadvantages of this technology are revealed. For example, advantages are high protection at hard operating conditions, rewritable tags and the disadvantages are limited using the tags at high temperatures, occurrence the effect of collision. Authors made conclusions that investigated RFID-tags can be used for assembly manufacturing.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.