MATEC Web of Conferences

Open Access

Study on the Application of the Holistic Optimization Method of the Manufacturing Process in the Case of a Reduced Instances Database 01001

Cezarina Afteni, Mitica Afteni and Gabriel-Radu Frumusanu

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801001

• Abstract
• PDF (749.1 KB)
• References

Open Access

The Influence of Lubrication on the Roughness of the Vibroburnished Surface 01002

Gheorghe Nagîţ, Laurenţiu Slătineanu, Oana Dodun, Viorel Păunoiu, Marius-Andrei Mihalache, Marius-Ionuţ Rîpanu, Adelina Hriţuc and Ioan Surugiu

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801002

• Abstract
• PDF (494.6 KB)
• References

Open Access

Study of the enwrapping of the front profiles of the active elements of a three-screw compressor 01003

N. Baroiu, V.G. Teodor, V. Paunoiu, G.A. Morosanu and R.S. Craciun

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801003

• Abstract
• PDF (710.4 KB)
• References

Open Access

Mechanical Behaviour of Macroscopic Interfaces for 3D Printed Multi-material Samples 01004

Vasile Ermolai, Alexandru Sover, Marius Andrei Boca, Adelina Hriţuc, Laurenţiu Slătineanu, Gheorghe Nagîţ and Răzvan Cosmin Stavarache

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801004

• Abstract
• PDF (2.579 MB)
• References

Open Access

Influence of bond interface over the lap-shear performance of 3D printed multi-material samples 01005

Vasile Ermolai, Alexandru Sover and Gheorghe Nagîţ

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801005

• Abstract
• PDF (1.361 MB)
• References

Open Access

Analysis of the metal sheets formability at single point incremental forming process 01006

Gabriela-Petruţa Rusu, Valentin Ştefan Oleksik, Radu Eugen Breaz, Dan Dobrotă and Ilie Octavian Popp

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801006

• Abstract
• PDF (784.6 KB)
• References

Open Access

Analysis of forming forces at SPIF using Taguchi method 01007

Mihai-Octavian Popp, Sever-Gabriel Racz, Mihaela Oleksik, Claudia Gîrjob and Cristina Biriş

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801007

• Abstract
• PDF (491.0 KB)
• References

Open Access

Optimization of Manufacturing Processes by Reducing the Costs of Tools and Equipment on Hydraulically Operated High-Pressure Technological Lines 01008

Teodor Costinel Popescu, Alexandru-Polifron Chiriţă, Ana-Maria Carla Popescu, Andrei Vlad, Gheorghe Alexandru Trăneci and Alina Iolanda Popescu

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801008

• Abstract
• PDF (777.1 KB)
• References

Open Access

Modern Techniques for Remanufacturing Hydraulic Equipment in the Context of Circular Economy and Energy Efficiency 01009

Cătălin Dumitrescu, Adinel Gavrus, Radu Rădoi, Ştefan Şefu, Alexandru-Polifron Chiriţă, Ana-Maria Popescu and Dragoş Preda

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801009

• Abstract
• PDF (593.2 KB)
• References

Open Access

Neural networks for predicting kerf characteristics of CO₂ laser-machined FFF PLA/WF plates 01010

N. A. Fountas, K. Ninikas, D. Chaidas, J. Kechagias and N. M. Vaxevanidis

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801010

• Abstract
• PDF (1.986 MB)
• References

Open Access

Quality characteristics analysis for the assembly of the elements from the construction of a mechanism for adjusting the seats in the automotive industry 01011

G.A. Morosanu, V.G. Teodor, V. Paunoiu, R.S. Craciun and N. Baroiu

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801011

• Abstract
• PDF (1.207 MB)
• References

Open Access

On the Machining of Joint Implant UHMWPE Inserts 01012

Miroslav Piska and Katerina Urbancova

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801012

• Abstract
• PDF (1.757 MB)
• References

Open Access

Digital Twins for Micro Machining 01013

Vytautas Ostasevicius, Sandra Mikuckyte, Rimvydas Gaidys, Vytautas Jurenas and Vytautas Daniulaitis

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801013

• Abstract
• PDF (1.464 MB)
• References

Open Access

Management of tools in digital manufacturing - A case study 01014

Vojin Vukadinović, Jovan Živković, Dragan Đurđanović and Vidosav Majstorović

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801014

• Abstract
• PDF (823.1 KB)
• References

Open Access

How to apply the ERP model for Smart Mining? 01015

Vidosav Majstorovic, Vladimir Simeunovic, Radivoje Mitrovic, Dragan Stosic, Sonja Dimitrijevic and Zarko Miskovic

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801015

• Abstract
• PDF (1.344 MB)
• References

Open Access

Functional correlation surface texture / grip of a deposit: case of NiP 01016

Enora Levrel, Siti Nursyafinaz Binti Mohd Safie, Pierrick Malécot, Virgile Lambert, Michael Fontaine, Loic Hallez and Séverine Lallemand

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801016

• Abstract
• PDF (407.8 KB)
• References

Open Access

Biodegradable polymer properties through ceramic coatings 01017

Alina Marguta, Simona-Nicoleta Mazurchevici, Constantin Carausu and Dumitru Nedelcu

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801017

• Abstract
• PDF (763.1 KB)
• References

Open Access

Getting started procedure of a NC machine simplified by the use of a mixed-reality training scenario 01018

Philippe Seitier, Patrick Gilles, Valérie Boudier, Michel Galaup and Pierre Lagarrigue

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801018

• Abstract
• PDF (388.7 KB)
• References

Open Access

In-situ prediction of the spatial surface roughness profile during slot milling 01019

Bernd Peukert, Adithya Rangaraju and Andreas Archenti

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801019

• Abstract
• PDF (5.081 MB)
• References

Open Access

An Inverse Analysis Method Applied to Optimization of Specimen’s Shape for Performing Hot Rapid Crushing Tests from Homogeneous Initial Temperature Field 01020

Adinel Gavrus

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801020

• Abstract
• PDF (331.3 KB)
• References

Open Access

An Energy Approach Applied to Define Elasto-Plastic Constitutive Models Describing Thermomechanical Metallic Materials Behavior During Forming Processes 01021

Adinel Gavrus

Published online: 19 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801021

• Abstract
• PDF (211.9 KB)
• References

Open Access

Contribution to a new method for deep drawing with kinetic control 01022

Viorel Paunoiu, Virgil Teodor, Nicusor Baroiu, Georgiana-Alexandra Morosanu and Alexandru Epureanu

Published online: 31 October 2022

DOI: https://doi.org/10.1051/matecconf/202236801022

• Abstract
• PDF (412.6 KB)
• References