Open Access
MATEC Web Conf.
Volume 368, 2022
NEWTECH 2022 – The 7th International Conference on Advanced Manufacturing Engineering and Technologies
Article Number 01022
Number of page(s) 7
Section Advanced Manufacturing Engineering and Technologies
Published online 31 October 2022
  1. Patent US8831914B2 – Pseudo-physical modeling of drawbead in stamping simulations [Google Scholar]
  2. Patent US 5572896A – Strain path control in forming processes [Google Scholar]
  3. Patent US 6832501B2 – Method for Producing Components using a Flowable Active Medium and a Forming Tool 6 [Google Scholar]
  4. Breunig, A., Hoppe, F. and Groche, P., Blank Holder Pressure Control in Cup Drawing through Tilting of the Ram, NUMIFORM 2019, The 13th International Conference on Numerical Methods in Industrial Forming Processes, June 23-27, Portsmouth, New Hampshire, USA [Google Scholar]
  5. Paunoiu, V., Teodor, V.G., Baroiu, N. and Morosanu, G.A., Deep drawing die with kinetic control, UGAL Invent 2021 Exhibition and Conferences, Galati, Romania [Google Scholar]
  6. Hardt, D.E., Norfleet, N.A., Valentin, V.M., Parris, A., In-process control of strain in a stretch forming process. Trans ASME 123, 2001 [Google Scholar]
  7. Valjavec, M., Hardt, D.E., Closed-loop shape control of the stretch forming process over a reconfigurable tool: precision airframe skin fabrication. In: Proceedings of the ASME sym-posium on advances in metal forming, Nashville, November 1999 [Google Scholar]
  8. Naceur, S., Hedi, B.H.S., Ability of the flexible hydroforming using segmented tool, Int J Adv Manuf Technol, DOI 10.1007/s00170-016-9160-9 [Google Scholar]
  9. Paunoiu, V., Baroiu, N., Maier, C., Epureanu, A., Marinescu, V., Reconfigurable deep draw-ing equipment, Patent number RO 128719-A2, 2011 [Google Scholar]
  10. Paunoiu, V., Boazu, D., Hydro-multipoint Forming, a Challenge in Sheet Metal Forming, Springer International Publishing AG 2017, Lecture Notes in Mechanical Engineering, doi: 10.1007/978-3-319-56430-2_7 [Google Scholar]
  11. Siegert, K., CNC hydraulic multipoint blank-holder system for sheet metal forming presses, Ann. CIRP 42 (1) (1993) 319–322 [CrossRef] [Google Scholar]
  12. Thirvarudchelvan, S., Lewis, W., The redrawing of cups at redraw ratio of 3 using an annular urethane pad, J. Mater. Process. Technol. 87 (3) (1999) 128–130 [CrossRef] [Google Scholar]
  13. Hassan, M.A., Takakura, N., Yamaguchi, K., Friction aided deep drawing using newly de-veloped blank-holder divided into eight segments, Int. J. Machine Tools Manuf. 43 (6) (2003) 637–646 [CrossRef] [Google Scholar]
  14. Gavrus, A., Banu, M., Ragneau, E., Maier, C., An Inverse Analysis of the Erichsen Test Applied for Automatic Identification of Sheet Metal Behavior, Engineering, vol. 2, nr. 7, (2010), 471–474, doi:10.4236/eng.2010.27062 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.