Open Access
| Issue |
MATEC Web Conf.
Volume 368, 2022
NEWTECH 2022 – The 7th International Conference on Advanced Manufacturing Engineering and Technologies
|
|
|---|---|---|
| Article Number | 01005 | |
| Number of page(s) | 9 | |
| Section | Advanced Manufacturing Engineering and Technologies | |
| DOI | https://doi.org/10.1051/matecconf/202236801005 | |
| Published online | 19 October 2022 | |
- Singh, S., Singh, G., Prakash, C., Ramakrishna, S., Current status and future directions of fused filament fabrication. J. Manuf. Process. 55, 288-306 (2020). [CrossRef] [Google Scholar]
- Prajapati, M., J., Kumar, A., Lin, S.C., Jeng, J.Y., Multi-material additive manufacturing with lightweight closed-cell foam-filled lattice structures for enhanced mechanical and functional properties. Addit. Manuf. 54, 102766 (2022). [Google Scholar]
- Chu, H., Yang, W., Sun, L., Cai, S., Yang, R., Liang, W., Yu, H., Liu, L., 4D Printing: A Review on Recent Progresses. Micromachines 11(9), 796 (2020). [CrossRef] [Google Scholar]
- Peng B., Yang, Y., Ju, T., Cavicchi, K.A., Fused Filament Fabrication 4D Printing of a Highly Extensible, Self-Healing, Shape Memory Elastomer Based on Thermoplastic Polymer Blends. ACS Appl. Mater. Interfaces 13, 12777-12788 (2021). [CrossRef] [Google Scholar]
- Freund, R., Watschke, H., Heubach, J., Vietor, T., Determination of Influencing Factors on Interface Strength of Additively Manufactured Multi-Material Parts by Material Extrusion. Appl. Sci. 9, 1782 (2019). [CrossRef] [Google Scholar]
- Popescu, D., Zapciu, A., Amza, C., Baciu, F., Marinescu, R., FDM process parameters influence over the mechanical properties of polymer specimens: A review. Polymer Testing 69, 157-166 (2018). [CrossRef] [Google Scholar]
- Zhou, M., Zhou, X., Si, L., Chen, P., Li, M., Zhang, Y., Zhou, H., Modeling of bonding strength for Fused Filament Fabrication considering bonding interface evolution and molecular diffusion, J. Manuf. Process. 68, 1485-1494 (2021). [CrossRef] [Google Scholar]
- Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., Wang, D., Fused filament fabrication of polymer materials: A review of interlayer bond. Addit. Mnuf. 37, 101658 (2021). [Google Scholar]
- Ribeiro, M., Carneiro, O.S., Interface geometries in 3D multi-material prints by fused filament fabrication. Rapid Prototyp. J. 25(1), 38-46 (2019). [CrossRef] [Google Scholar]
- Harris, C.G., Jursik, N.J.S., Rochefort, W.E., Walker, T.W., Additive Manufacturing with soft TPU-Adhesion strength in multimaterial flexible joints. Front. Mech. Eng. 5, 37 (2019). [CrossRef] [Google Scholar]
- Hasanov S., Gupta, A., Nasirov, A., Fidan, O., Mechanical characterisation of functionally graded materials produced by the fused filament fabrication process. J. Manuf. Process. 58, 923-935 (2020). [CrossRef] [Google Scholar]
- Ando, M., Birosz, M., Jeganmohan, S., Surface bonding of additive manufactured parts from multi-colored PLA materials. Measurement 169, 108583 (2021). [CrossRef] [Google Scholar]
- Ermolai, V., Sover, A., Nagîţ, G.: Influence of contact geometry over the filament bond of polylactic acid blends. In: Conf. Ser.: Mater. Sci. Eng., vol. 1235, 012004, (2021). [Google Scholar]
- Watschke, H., Waalkes, L., Schumacher, C., Vietor, T., Development of Novel Test Specimens for Characterisation of Multi-Material Parts Manufactured by Material Extrusion. Appl. Sci. 8, 1220 (2018). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.