Open Access
Issue
MATEC Web Conf.
Volume 368, 2022
NEWTECH 2022 – The 7th International Conference on Advanced Manufacturing Engineering and Technologies
Article Number 01011
Number of page(s) 12
Section Advanced Manufacturing Engineering and Technologies
DOI https://doi.org/10.1051/matecconf/202236801011
Published online 19 October 2022
  1. Hallmann, M., Schleich, B., Wartzack, S.: From tolerance allocation to tolerance-cost optimization: a comprehensive literature review. The International Journal of Advanced Manufacturing Technology 107, 4859–4912 (2020). [CrossRef] [Google Scholar]
  2. Gheorghe, D., Georgescu, C., Baroiu, N.: Toleranţe şi control dimensional (Tolerances and dimensional control), Ed. Scorpion, Galaţi (2002). [Google Scholar]
  3. Geppert, L., Ickstadt, K., Munteanu, A., Sohler, C.: Streaming statistical models via Merge & Reduce. International Journal of Data Science and Analytics 10, 331–347 (2020). [CrossRef] [Google Scholar]
  4. Juran, J., Godfrey, B.: Juran’s Quality Handbook. McGraw-Hill, New York (1998). [Google Scholar]
  5. Mereuţă, E., Rus, M., Mereuţă, C.: Managementul calităţii (Quality management). Ed. Academica, Galaţi (2006). [Google Scholar]
  6. *** EN ISO 9000:2000 Quality management systems Fundamentals and vocabulary. [Google Scholar]
  7. Quality Management in the Bosch Group Technical Statistics, Booklet No. 9 Machine and Process Capability, Robert Bosch GmbH (2019). [Google Scholar]
  8. Arcidiacono, G., Nuzzi, S.: A Review of the Fundamentals on process capability, process performance, and process Sigma, and an introduction to process Sigma Split. International Journal of Applied Engineering Research 12(14), 4556–4570 (2017). [Google Scholar]
  9. Shinde, J.H., Katikar, R.S.: Importance of process capability and process performance indices in machine tool. International Journal of Research in Engineering & Applied Sciences 2, 1211–1217 (2012). [Google Scholar]
  10. Bulgaru, M., Bolboacă, L.: Ingineria calităţii. Managementul calităţii, statistică şi control, măsurări în 3D (Quality engineering. Quality management, statistics and control, 3D measurements). Ed. Alma Mater, Cluj-Napoca (2001). [Google Scholar]
  11. Montgomery, D., Runger, G.: Applied statistics and probability for engineers. Third Edition. Ed. John Wiley & Sons, New York (2002). [Google Scholar]
  12. Baroiu, N., Teodor, V.G., Căpitănescu, V., Repeatability analysis of drill positioning to a CNC vertical machining center. Academic Journal of Manufacturing Engineering – AJME 1, 14–19, (2013). [Google Scholar]
  13. Oakland, J.: Statistical process control. Fifth Edition. Butterworth Heinemann (2003). [Google Scholar]
  14. Teodor, V.G., Păunoiu, V., Baroiu, N., Susac, F.: Optimization of the measurement path for the car body parts inspection. Measurement 146, 15–23 (2019). [CrossRef] [Google Scholar]
  15. Teodor, V.G., Păunoiu, V., Cărăuşu, C., Baroiu, N., Costin, G.A.: Statistical control of forming process. IOP Conf. Series: Materials Science and Engineering 591(012071), 1–8 (2019). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.