| Issue |
MATEC Web Conf.
Volume 247, 2018
Fire and Environmental Safety Engineering 2018 (FESE 2018)
|
|
|---|---|---|
| Article Number | 00057 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/matecconf/201824700057 | |
| Published online | 10 December 2018 | |
The effectiveness of selected decontamination techniques in the process of decontamination of chemical protection suits used by chemical rescue units in Fire Service
The Main School of Fire Service, Faculty of Fire Safety Engineering, 52/54 Slowackiego St., 01-629 Warsaw, Poland
* Corresponding author: zsalamonowicz@sgsp.edu.pl
The paper presents research of the process of decontamination of chemical protection suits. The results of the research show the effectiveness of selected decontamination techniques. In experiments took into account the influence of the contaminant, the time of decontamination, the type of the decontamination agent and the use of mechanical support in removing the contaminant. The research has shown how to minimize the negative action of hazardous substances on protective clothing and show the problem of the possibility of secondary contamination. They demonstrate the impact of each factors on the quality of decontamination and showed that small changes in the process of decontamination significantly affect the safety of the rescuer. The key to effective decontamination is the synergy effect of the studied parameters. This approach will allow efficient and effective execution of the decontamination process, minimize the risk of contact between rescuers and the contaminant and prevent secondary contamination.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.