MATEC Web of Conferences

Open Access

Editorial 00001

Gabriel Mansour, Dimitrios Tzetzis and Panagiotis Kyratsis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031800001

• Abstract
• PDF (243.4 KB)

Open Access

Virtual pole method applied at the profiling of the gear shaped cutter tool for generating a K-type bore 01001

Georgiana Alexandra Costin and Virgil Gabriel Teodor

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801001

• Abstract
• PDF (885.4 KB)
• References

Open Access

Effect of the crystallinity of NCD and MLD diamond coatings characterized by same level of residual stresses after annealing on their fatigue strength and wear behavior in milling 01002

Georgios Skordaris, Tilemachos Kotsanis, Apostolos Boumpakis and Fani Stergioudi

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801002

• Abstract
• PDF (798.5 KB)
• References

Open Access

Influence of stiffness characteristics of a railway track on output parameters in a multibody model 01003

Ján Dižo and Miroslav Blatnický

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801003

• Abstract
• PDF (733.2 KB)
• References

Open Access

Design of a prototype of an engine mechanism with rotating cylinders 01004

Miroslav Blatnický and Ján Dižo

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801004

• Abstract
• PDF (788.6 KB)
• References

Open Access

The Study of a Control Signal’s Phase Shift Influence on the Efficiency of a System for Active Vibration Damping Based on MFC Piezoelectric Transducers 01005

Marek Płaczek

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801005

• Abstract
• PDF (939.7 KB)
• References

Open Access

Progress and recent trends in generative design 01006

Ioannis Ntintakis and George E. Stavroulakis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801006

• Abstract
• PDF (683.9 KB)
• References

Open Access

Stop wasting! A plea for maintenance 01007

Felicia Veronica Banciu and Eugen Pămîntaş

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801007

• Abstract
• PDF (372.6 KB)
• References

Open Access

Effect of machine hammer peening on the surface integrity of a ZnAl-based corrosion protective coating 01008

Alina Timmermann, Mohamed Abdulgader, Leif Hagen, Alexander Koch, Philipp Wittke, Dirk Biermann, Wolfgang Tillmann and Frank Walther

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801008

• Abstract
• PDF (874.8 KB)
• References

Open Access

3D-Printed Composite Bone Bricks For Large Bone Tissue Applications 01009

Evangelos Daskalakis, Fengyuan Liu, Anil A. Acar, Edera-Elena Dinea, Glen Cooper, Andrew Weightman, Bahattin Koç, Gordon Blunn and Paulo Jorge Bártolo

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801009

• Abstract
• PDF (700.9 KB)
• References

Open Access

Preliminary studies on the suitability of PETG for 4D printing applications 01010

Mohamed H. Hassan, Abdalla M. Omar, Evangelos Daskalakis, Fengyuan Liu and Paulo Bartolo

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801010

• Abstract
• PDF (486.5 KB)
• References

Open Access

The Influence of the AWJM Working Parameters on Manufactured Surfaces Microgeometry 01011

Iulian Patirnac, Razvan George Ripeanu and Eugen Laudacescu

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801011

• Abstract
• PDF (741.2 KB)
• References

Open Access

Advanced technologies for shoe sole production 01012

Tatjana Spahiu, Henrique Almeida, Rita M. T. Ascenso, Liliana Vitorino and Anabela Marto

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801012

• Abstract
• PDF (637.3 KB)
• References

Open Access

Functional Analysis Diagram of a Flux Modulated Magnetic Gear 01013

Gheorghe Galmadi and Oana Dodun

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801013

• Abstract
• PDF (638.6 KB)
• References

Open Access

Experimental study on noise reduction and performance enhancement for internal combustion engines 01014

Ioan Radu Şugar and Mihai Banica

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801014

• Abstract
• PDF (589.6 KB)
• References

Open Access

Impact of process parameters on dimensional accuracy of PolyJet 3D printed parts using grey Taguchi method 01015

Kyriaki-Evangelia Aslani, Apostolos Korlos, John D Kechagias and Konstantinos Salonitis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801015

• Abstract
• PDF (615.7 KB)
• References

Open Access

Tribological Characterization of Some Elastomers Used at Progressive Cavity and Piston Pumps 01016

Naboulsi Mohamed Iyad Al, Niculae Napoleon Antonescu, Alin Dinita and Marius Morosanu

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801016

• Abstract
• PDF (955.8 KB)
• References

Open Access

Experimental Researches to Establish the Optimum Hardbanding Technology and Materials of the Heavy Weight Drill Pipe 01017

Mihaela Madalina Caltaru, Razvan George Ripeanu, Marius Badicioiu and Dragos Gabriel Zisopol

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801017

• Abstract
• PDF (817.4 KB)
• References

Open Access

Research, study, design and development of an artificial ear splint model by using a 3D printer 01018

Athanasios Argyropoulos and Pantelis N. Botsaris

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801018

• Abstract
• PDF (596.2 KB)
• References

Open Access

Design and Analysis of a 5-Axis Gantry CNC Machine Tool 01019

Esra Yuksel, Emre Özlü, Ahmet Oral, Fulya Tosun, Osman Fatih İğrek and Erhan Budak

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801019

• Abstract
• PDF (856.7 KB)
• References

Open Access

Design of a spiral bevel gear acc. to ISO 23509:2006 standards 01020

Ioannis Tsiafis, Polychronia Mamouri and Kyriakos Kyriakidis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801020

• Abstract
• PDF (911.4 KB)
• References

Open Access

Skills Requirements for the 4^th Industrial Revolution: The Additive Manufacturing case 01021

Panagiotis Stavropoulos, Andreas K. Lianos, Harry Bikas and Dimitris Mourtzis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801021

• Abstract
• PDF (656.5 KB)
• References

Open Access

Green Face of Packaging – Sustainability Issues of the Cosmetic Industry Packaging 01022

Jelena Drobac, Vesna Alivojvodic, Predrag Maksic and Marina Stamenovic

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801022

• Abstract
• PDF (360.0 KB)
• References

Open Access

Circular economy framework for sustainable product design strategies 01023

Vesna Alivojvodic, Jelena Drobac, Predrag Maksić and Marina Stamenovic

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801023

• Abstract
• PDF (545.3 KB)
• References

Open Access

A novel printing channel design for multi-material extrusion additive manufacturing 01024

Pinar Urhal

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801024

• Abstract
• PDF (1.012 MB)
• References

Open Access

Optimization of a novel external fixator for orthopaedic applications 01025

Mohammed S. Alqahtani

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801025

• Abstract
• PDF (570.5 KB)
• References

Open Access

Usability evaluation of mechatronic system by primary school children 01026

Maria Chatzikyrkou

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801026

• Abstract
• PDF (512.3 KB)
• References

Open Access

An AM-oriented vehicle chassis’ A-Pillar Design Approach 01027

Agisilaos Kyriazis, Dimitrios Koulocheris, Stamatios Polydoras and Clio Vossou

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801027

• Abstract
• PDF (821.3 KB)
• References

Open Access

An ad hoc decision support method over additive vs. conventional manufacturing 01028

Stamatios Polydoras, Clio Vossou and Dimitrios Koulocheris

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801028

• Abstract
• PDF (463.8 KB)
• References

Open Access

Electrospun PCL-Surgihoney meshes for skin wound healing applications 01029

Enes Aslan

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801029

• Abstract
• PDF (718.2 KB)
• References

Open Access

A CPS platform oriented for Quality Assessment in welding 01030

Panagiotis Stavropoulos, Alexios Papacharalampopoulos and Kyriakos Sampatakakis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801030

• Abstract
• PDF (605.4 KB)
• References

Open Access

Experimental Analysis and Soft Computing Modeling of Abrasive Waterjet Milling of Steel Workpieces 01031

Panagiotis Karmiris-Obratański, Nikolaos E. Karkalos, Anastasios Tzotzis, Panagiotis Kyratsis and Angelos P. Markopoulos

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801031

• Abstract
• PDF (416.1 KB)
• References

Open Access

A Pedagogical Methodology for Introducing CAD Modeling Tools and 3D Printing Technologies to Adult Trainees 01032

Maria Chatzikyrkou, Athanasios Manavis, Prodromos Minaoglou and Nikolaos Efkolidis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801032

• Abstract
• PDF (1.344 MB)
• References

Open Access

Non-destructive testing of welded fatigue specimens 01033

Sofia Papanikolaou, Dimitrios Fasnakis, Andreas Maropoulos, Dimitrios Giagopoulos, Stergios Maropoulos and Theodoros Theodoulidis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801033

• Abstract
• PDF (760.9 KB)
• References

Open Access

Safety Management of Hazardous Materials - Orphan Radioactive Sources: Contribution of STRASS Project 01034

Stelios Xanthos, Alexandros Clouvas, Fokion Leontaris and Nikolaos Liampas

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801034

• Abstract
• PDF (521.4 KB)
• References

Open Access

Code development for the implementation of the Part Conditional Scale Feature in 3D CAD software platforms 01035

Konstantinos Vogiatzis and Georgios Skordaris

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801035

• Abstract
• PDF (429.7 KB)
• References

Open Access

3D Printing Assisted Product Design Addressing Refugees Needs 01036

Antigoni Panagiotidou and Dimitris Karalekas

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801036

• Abstract
• PDF (607.8 KB)
• References

Open Access

Prospective analysis of the impact of a pandemic in Industry 4.0 01037

Georgios Andreadis and Ana Isabel Quirós Gámez

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801037

• Abstract
• PDF (414.9 KB)
• References

Open Access

3D finite element analysis of Al7075-T6 drilling with coated solid tooling 01038

Anastasios Tzotzis, Angelos Markopoulos, Nikolaos Karkalos and Panagiotis Kyratsis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801038

• Abstract
• PDF (909.6 KB)
• References

Open Access

Design of 3D printed smart material compatible hand prosthesis 01039

Abdalla M. Omar and Mohamed Hassan

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801039

• Abstract
• PDF (1.046 MB)
• References

Open Access

The influence of chromium as a diffusive additive in the boronizing treatment of AISI 4140 steel on the corrosion resistance of the coating evaluated by Electrochemical Impedance Spectroscopy (EIS) 01040

Dimitrios I. Zagkliveris, Azarias Mavropoulos, Efstathios Ntovinos and Georgios K. Triantafyllidis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801040

• Abstract
• PDF (739.7 KB)
• References

Open Access

Design of Multiple Mailboxes 01041

Athena Baronos, Odysseas Manoliadis and Aristeidis Pavlidis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801041

• Abstract
• PDF (644.9 KB)
• References

Open Access

The design of mechatronic system for gel electrophoresis 01042

Apostolos Tsagaris, Konstantinos Theodoridis, Fotis Stergiopoulos, Dimitrios Bechtsis, Nikolaos Nikolaidis, Dimitrios Triantafyllidis, Asterios Papaoikonomou and Anastasios Filelis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801042

• Abstract
• PDF (696.1 KB)
• References

Open Access

A Space-Time POD Basis Interpolation on Grassmann Manifolds for Parametric Simulations of Rigid-Viscoplastic FEM 01043

Orestis Friderikos, Marc Olive, Emmanuel Baranger, Dimitrios Sagris and Constantine N. David

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801043

• Abstract
• PDF (374.1 KB)
• References

Open Access

Modeling and simulation of the nanosecond pulsed laser engraving process 01044

Evangelos Nikolidakis and Aristomenis Antoniadis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801044

• Abstract
• PDF (935.3 KB)
• References

Open Access

Computer modelling and simulation of a novel printing head for complex tissue engineering constructs 01045

Gokhan Ates

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801045

• Abstract
• PDF (762.8 KB)
• References

Open Access

Starch Sandstones in Building Bio-materials 01046

Gabriel Mansour, Maria Zoumaki and Dimitrios Tzetzis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801046

• Abstract
• PDF (698.2 KB)
• References

Open Access

Research Methods And Experiments of Piezoelectric Plates 01047

Andrzej Wróbel

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801047

• Abstract
• PDF (544.6 KB)
• References

Open Access

Model-based definition capabilities and its impact on industrial productivity 01048

Emmanouil Varitis, Konstantinos Rinos and Nikolaos Kostis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801048

• Abstract
• PDF (449.3 KB)
• References

Open Access

The mechanical performance of 3D printed hierarchical honeycombs using carbon fiber and carbon nanotube reinforced acrylonitrile butadiene styrene filaments 01049

Michel Theodor Mansour, Konstantinos Tsongas and Dimitris Tzetzis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801049

• Abstract
• PDF (707.2 KB)
• References

Open Access

Vibration isolation performance of an elevator motor using Nitrile-Butadiene Rubber /Multi-Walled Carbon Nanotube composite machine mounts 01050

Konstantinos Tsongas and Gabriel Mansour

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801050

• Abstract
• PDF (625.9 KB)
• References

Open Access

Prediction of the main cutting force in longitudinal turning of AISI D6 tool steel bars by applying full and fractional experimental design 01051

Kyriaki-E. Aslani, John D. Kechagias, Nikolaos A. Fountas, Nektarios Vidakis, Angelos Koutsomichalis, Dimitrios E. Manolakos and Nikolaos M. Vaxevanidis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801051

• Abstract
• PDF (492.9 KB)
• References

Open Access

A microcontroller-based software framework for controlling a mechatronic system 01052

Nikolaos Nikolaidis, Nikolaos Evgenidis, Dimitrios Bechtsis, Fotis Stergiopoulos, Apostolos Tsagaris, Dimitrios Triantafyllidis, Asterios Papaoikonomou and Anastasios Filelis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801052

• Abstract
• PDF (782.9 KB)
• References

Open Access

Growth of hydrophobic membrane on copper surface and study of its corrosive behavior 01053

Αikaterini Baxevani, Fani Stergioudi, Αzarias Mavropoulos and Νikolaos Michailidis

Published online: 14 August 2020

DOI: https://doi.org/10.1051/matecconf/202031801053

• Abstract
• PDF (760.4 KB)
• References