| Issue |
MATEC Web Conf.
Volume 318, 2020
7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020)
|
|
|---|---|---|
| Article Number | 01020 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/matecconf/202031801020 | |
| Published online | 14 August 2020 | |
Design of a spiral bevel gear acc. to ISO 23509:2006 standards
Laboratory of Machine Tools and Manufacturing Engineer, Aristotle University of Thessaloniki, Greece
* Corresponding author: mamourip@meng.auth.gr
When the transmitting of power and torque between parts of a machine requires high efficiency, the most appropriate type of gears are the bevel gears. The two main forms of bevel gears are straight and spiral bevel gears. Manufacturing of bevel gears has been implemented using dedicated bevel gear cutting machines. These machines make the production of this type of gears quite costly. This is the main reason that forced many manufacturers start using CNC milling machines for cutting bevel gears. A combination of a 5-axis milling center machine and a modern computer aided manufacturing (CAM) system that supports a vast number of complicated machining procedures, offers the opportunity of machining high quality bevel gears. This paper concerns the presentation of a program written in MATLAB that calculates the basic designing features of a bevel gear pair, as they described by ISO standard. It is also presented the calculated tooth profiling that is used in order to be designed a 3-D model of the gears in a CAD software.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.