Free Access to the whole issue

Open Access

About the conference

Published online: 03 August 2020

• PDF (247 KB)

Open Access

Statement of Peer review

Published online: 03 August 2020

• PDF (4.22 MB)

Open Access

Preface 00001

Dimitar Karaivanov

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031700001

• Abstract
• PDF (96.85 KB)

Design, Analysis, Simulation and Optimization

Open Access

A Wolfrom transmission without carrier 01001

B.-R. Höhn, Y. Zhang, M. Geitner and M. Otto

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031701001

• Abstract
• PDF (1.039 MB)
• References

Open Access

On the evaluation of the meshing stiffness of external spur gears 01002

Miguel Pleguezuelos, Miryam B. Sánchez and José I. Pedrero

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031701002

• Abstract
• PDF (525.3 KB)
• References

Open Access

Introduction of a redundant actuator using planetary gear trains for human centred robotics 01003

Stein Crispel, Pablo López-García, Tom Verstraten, Elias Saerens and Dirk Lefeber

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031701003

• Abstract
• PDF (534.2 KB)
• References

Open Access

Solving the problem of optimal design for a two-stage reducer by using a modified evolutionary algorithm 01004

Oleksandr Ustynenko, Oleksiy Bondarenko and Volodymyr Serykov

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031701004

• Abstract
• PDF (913.0 KB)
• References

Open Access

Design solutions overview of single-stage universal gear reducers 01005

Milan Rackov, Siniša Kuzmanović, Ivan Knežević, Maja Čavić, Marko Penčić, Vladimir B. Algin, Victor E. Starzhinsky and Sergey V. Shil’ko

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031701005

• Abstract
• PDF (1.170 MB)
• References

Open Access

Design and construction of a continuous impregnation apparatus of woven fibres, using non-meshing double-sinusoidal toothed rollers 01006

G. Vasileiou, C. Vakouftsis, N. Rogkas, S. Tsolakis, P. Zalimidis and V. Spitas

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031701006

• Abstract
• PDF (788.8 KB)
• References

Open Access

Dynamic modelling and torque ripple minimization of a lightweight ultra-high transmission ratio harmonic drive 01007

Efstratios Tsolakis, Georgios Vasileiou, Nikolaos Rogkas, Christos Kalligeros, Pavlos Zalimidis and Vasilios Spitas

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031701007

• Abstract
• PDF (811.9 KB)
• References

Dynamics, Vibration and Noise

Open Access

Investigation of the forced spatial vibrations of a wood shaper, caused by rotor’s unbalance of its electric motor and by cutting forces 02001

Valentin Slavov and Georgi Vukov

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031702001

• Abstract
• PDF (568.5 KB)
• References

Open Access

Dynamic loading of friction disks in automotive transmissions 02002

Alexander Taratorkin, Victor Derzhanskii and Igor Taratorkin

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031702002

• Abstract
• PDF (330.0 KB)
• References

Maintenance, Operation, and Industrial Application

Open Access

Remanufacture of rotary tables for heavy duty machine tools 03001

Dan Prodan, Anca Bucuresteanu, Adrian Motomancea and Alina Ovanisof

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031703001

• Abstract
• PDF (763.6 KB)
• References

Open Access

Prospective model of the hybrid shunting diesel locomotive 03002

Serhii Buriakovskyi, Artem Maslii, Daniil Pomazan and Olga Pasko

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031703002

• Abstract
• PDF (942.6 KB)
• References

Tribology, Lubrication

Open Access

A comparative study on the effect of disks geometrical features on the drag torque of a wet friction clutch 04001

Nikolaos Rogkas, Despoina Almpani, Georgios Vasileiou, Eustratios Tsolakis, Christos Vakouftsis, P. Zalimidis and Vasilios Spitas

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031704001

• Abstract
• PDF (1.210 MB)
• References

Materials and Technological Processes

Open Access

Technique of tooth relieving of worm hobs for cutting Novikov gears with double lines of action 05001

Alexander Sandler and Sergey Lagutin

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031705001

• Abstract
• PDF (639.4 KB)
• References

Open Access

Investigation of the influence of gear milling modes of cylindrical gears on the quality parameters of tooth surfaces 05002

Mark Kane, Valery Sheleg, Marina Kravchuk and Pavel Kot

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031705002

• Abstract
• PDF (530.7 KB)
• References

Open Access

New possibilities of worm thread machining and practice of implementation 05003

Evgeniy Trubachev and Kirill Bogdanov

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031705003

• Abstract
• PDF (697.5 KB)
• References

Other Relevant Subjects

Open Access

Modeling filter material with an orthotropic structure based on woven mesh 06001

Aliaksandr Ilyushchanka, Iryna Charniak, Vyacheslav Kaptsevich, Valeria Korneeva, Ruslan Kusin, Igar Zakrevsky and Pavel Chuhayeu

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031706001

• Abstract
• PDF (478.0 KB)
• References

Open Access

Stab resistance of bulletproof vests. A conceptual model of test bench 06002

Svetlana Yaneva

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031706002

• Abstract
• PDF (748.9 KB)
• References

Open Access

Ballistic resistance of bulletproof vests level IIIA. Development of testing methodology 06003

Svetlana Yaneva

Published online: 03 August 2020

DOI: https://doi.org/10.1051/matecconf/202031706003

• Abstract
• PDF (462.0 KB)
• References