MATEC Web Conf.
Volume 318, 20207th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020)
|Number of page(s)||6|
|Published online||14 August 2020|
Virtual pole method applied at the profiling of the gear shaped cutter tool for generating a K-type bore
“Dunărea de Jos” University of Galati, Faculty of Engineering, Department of Manufacturing Engineering, Domnească street, no. 111, Romania
* Corresponding author: email@example.com
The “virtual pole” method allows profiling of the cutting tools that generate by rolling. This mode of generation is advantageous in terms of the accuracy of the geometric shape obtained. The mentioned method combines the analytical accuracy of profiling with a simplified calculation mode, compared to the established algorithms. The paper presents an application made on the basis of the “virtual pole” method, for the profiling of the gear shaped tool, designed to generate the bore of a bush with a K-profile. Based on this methodology, in house software was developed for the type of profile mentioned above. The program allows the numerical and graphical representation of the profile to be generated, the contact curve and the profile of the generating tool.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.