MATEC Web of Conferences

Open Access

Preface 00001

Raj Das

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823700001

• Abstract
• PDF (53.30 KB)

Open Access

Research and Application of Optimal Combination of Quick Drop Valve Flow Regenerative Performance Based on Orthogonal Experimental Design 01001

Xiaoxiang Li, Anlin Wang and Jiadong Lin

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701001

• Abstract
• PDF (701.6 KB)
• References

Open Access

Research on Energy Efficiency of Typical Construction Equipment for Transmission Lines in Tibet 01002

XIA Yongjun and ZHAO Fei

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701002

• Abstract
• PDF (2.017 MB)
• References

Open Access

Experimental Investigation and Performance Analysis of Ceramic Inserts in Laser Assisted Turning of Waspaloy 01003

Martyna Wiciak, Tadeusz Chwalczuk and Agata Felusiak

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701003

• Abstract
• PDF (378.2 KB)
• References

Open Access

Surface Roughness Characterization of Inconel 718 after Laser Assisted Turning 01004

Agata Felusiak, Tadeusz Chwalczuk and Martyna Wiciak

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701004

• Abstract
• PDF (663.8 KB)
• References

Open Access

Study on Stream Cooperation Connected Smart Manufacturing in Textile Timely Production System 01005

Jae-Yong Lee, Dae-Hee Lee, Jae-Sung Song, Jun-Hee Park, Sung-Hun Ryu and Jeung-Hyun Park

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701005

• Abstract
• PDF (2.676 MB)
• References

Open Access

The Fabrication of Hierarchical Carbon Nanotube/carbon fibre/polyethylene Composites via Twin Screw Extruder 01006

Chao Hu, Xinwen Liao, Qinghua Qin and Gang Wang

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701006

• Abstract
• PDF (850.1 KB)
• References

Open Access

Parametric Study on Vibration and Harmonic Analysis of Moderately Thick Functionally Graded Plates Using FEM 01007

Avadesh K. Sharma, M K Gaur and R K Dwivedi

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701007

• Abstract
• PDF (198.3 KB)
• References

Open Access

Study on Deformation Behavior of Ti6Al4V Parts Fabricated by Selective Laser Melting 01008

Tao Yang, Tingting Liu, Wenhe Liao, Changdong Zhang, Shengqin Duan and Xiangyuan Chen

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701008

• Abstract
• PDF (1.257 MB)
• References

Open Access

A solid-analytical-based model for extracting cutter-workpiece engagement in 5-axis flank machining 01009

Dongdong Li, Weimin Zhang, Tengfei Shang, Tianhong Gao, Shuo Liu and Jürgen Fleischer

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701009

• Abstract
• PDF (736.1 KB)
• References

Open Access

Vibration analysis of rotating rings with complex support stiffnesses 01010

Fuchun Yang, Yue Zhang and Hailong Li

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701010

• Abstract
• PDF (183.3 KB)
• References

Open Access

Vibration of thin cylindrical shells on an elastic foundation coupled with multiple discrete stiffnesses 01011

Fuchun Yang and Wenlei Qiu

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701011

• Abstract
• PDF (410.5 KB)
• References

Open Access

The effect of third principal stress in the measurement of residual stresses by hole-drilling method 01012

David Halabuk and Tomas Navrat

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701012

• Abstract
• PDF (572.1 KB)
• References

Open Access

The improvement on thermal performance of herbal ball compress 01013

Wasan Kamsanam and Rachaneewan Aungkurabrut

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701013

• Abstract
• PDF (275.8 KB)
• References

Open Access

Mechanical Vibration Mechanism Motion Simulation of Ultrasonic Composite Vibration Polishing Equipment 01014

Wan Hongqiang, Han Peiying, Ge Shuai, Fancong Li and Zhang Simiao

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701014

• Abstract
• PDF (543.4 KB)
• References

Open Access

Research and Application on the Key Parameters of the Long Compression and Short Pumping Ventilation Dust Removal System 01015

Zhang She-ji, MA Wei and MO Jin-ming

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701015

• Abstract
• PDF (126.1 KB)
• References

Open Access

Study of Plantar Pressure Distribution 01016

Chun Kit Ang, Mahmud Iwan Solihin, Weng Jun Chan and Yien Yien Ong

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701016

• Abstract
• PDF (997.6 KB)
• References

Open Access

Automatic MHT Method Based on Target Characteristics Applied in the Small Space Targets 01017

Qian ZHAO, Zhenhong NIU, Lian XUE, Xin LIU, Jianhua LI and Zhifeng LI

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823701017

• Abstract
• PDF (436.5 KB)
• References

Open Access

Producing Bio-Oil from Coconut Shell by Fast Pyrolysis Processing 02001

Dewi Selvia Fardhyanti, Megawati, Cepi Kurniawan, Retno Ambarwati Sigit Lestari and Bayu Triwibowo

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702001

• Abstract
• PDF (141.4 KB)
• References

Open Access

Synthesis of Silica Powder from Sugar Cane Bagasse Ash and Its Application as Adsorbent in Adsorptive-distillation of Ethanol-water Solution 02002

Megawati, Dewi Selvia Fardhyanti, Radenrara Dewi Artanti Putri, Oki Fianti, Agustin Fitrianingsi Simalango and Afiati Estrina Akhir

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702002

• Abstract
• PDF (447.9 KB)
• References

Open Access

Numerical Investigation on Physical Foaming and Decay Process Using Multicomponent Thermal Lattice Boltzmann Model 02003

Fu-Min Liu and An-Lin Wang

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702003

• Abstract
• PDF (204.3 KB)
• References

Open Access

Swelling Properties of Propranolol HCl-loaded Polyvinyl Alcohol-graft-lactic Acid Hydrogel Films 02004

Jirapornchai Suksaeree and Chomnapas Chuchote

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702004

• Abstract
• PDF (379.3 KB)
• References

Open Access

Formulation and Characterization of Topical Anti-acne Spot Gel Containing Herbal Extracts 02005

Jirapornchai Suksaeree and Chomnapas Chuchote

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702005

• Abstract
• PDF (744.9 KB)
• References

Open Access

Polymer Composite Manufacturing by FDM 3D Printing Technology 02006

Katarzyna Bryll, Elżbieta Piesowicz, Paweł Szymański, Wojciech Ślączka and Marek Pijanowski

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702006

• Abstract
• PDF (514.7 KB)
• References

Open Access

Innovative Multilayer Polymer-glass Composites Reinforced with Metal-ceramic Foam 02007

Katarzyna Gawdzińska, Janusz Grabian, Dorota Nagolska and Barbara Kwiecińska

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702007

• Abstract
• PDF (1.414 MB)
• References

Open Access

An Investigation of Tool Performance in Interrupted Turning of Inconel 718 02008

Tadeusz Chwalczuk, Martyna Wiciak, Agata Felusiak and Piotr Kieruj

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702008

• Abstract
• PDF (628.7 KB)
• References

Open Access

The Effects of Laser Surface Modification on the Microstructure of 1.4550 Stainless Steel 02009

Damian Przestacki, Aneta Bartkowska, Mateusz Kukliński and Piotr Kieruj

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702009

• Abstract
• PDF (2.481 MB)
• References

Open Access

Computational Thermal Model of Unidirectional Composites with Random Fiber Array 02010

Yuxuan Zhang, Hui Wang and Wanqing Lin

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702010

• Abstract
• PDF (1.086 MB)
• References

Open Access

The Research on a Confined Modeling Method of the Effect of Deformable Ground Soil and Crawler Board 02011

LV Wei, Zhong-xin LI and LOU Peng

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702011

• Abstract
• PDF (147.3 KB)
• References

Open Access

A Numerical Method for Analysing Heat Conduction in Composites Containing Encapsulated Phase Change Materials 02012

Hui Wang and Qing-Hua Qin

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702012

• Abstract
• PDF (1.180 MB)
• References

Open Access

Effect on the wettability, hardness and shear strength properties of 3%-nano Titanium Oxide (TiO₂) added Sn-3.8Ag-0.7Cu (SAC)/Copper (Cu) solder joint 02013

Amares Singh and Rajkumar Durairaj

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702013

• Abstract
• PDF (406.7 KB)
• References

Open Access

Influence of Process Parameters of Printing on Mechanical Properties of Plastic Parts Produced by FDM 3D Printing Technology 02014

Petr Vosynek, Tomas Navrat, Adela Krejbychova and David Palousek

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702014

• Abstract
• PDF (711.7 KB)
• References

Open Access

Liquid-Phase Sintering and Properties of PIMed 10-20 vol.% SiC_p-Reinforced Aluminium Composites 02015

Tapany Patcharawit, Arada Ngeekoh, Usanee Kitkhamthorn and Nutthita Chuankrekkul

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702015

• Abstract
• PDF (2.246 MB)
• References

Open Access

Effects of Dopant Types and Contents on Morphology and Strength Properties of PANI/PAN Electrospun Nanofibers 02016

Taohai Yan, Jinhua Jiang and Nanliang Chen

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823702016

• Abstract
• PDF (1.505 MB)
• References

Open Access

Wheel Loader Driving Intention Recognition with Gaussian Mixture - Hidden Markov Model 03001

Guoxiang Cao, Anlin Wang and Donghuan Xu

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703001

• Abstract
• PDF (405.0 KB)
• References

Open Access

Assessment on Structural Integrity of In-service Machine Using De-noised Vibrational Modal Data and Artificial Neural Network 03002

Zhi Chao Ong, Ee Teng Yap, Zubaidah Ismail and Shin Yee Khoo

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703002

• Abstract
• PDF (562.3 KB)
• References

Open Access

Optimal Design of Multi-section Proportional Directional Valve Throttle Grooves with Artificial Neural Networks 03003

Xiaolu Zhang, Anlin Wang and Jiangwei Tang

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703003

• Abstract
• PDF (550.7 KB)
• References

Open Access

Rule Optimization of Self-organization Control of Traffic Signals in Urban Net Based on Hydrodynamic 03004

Fusheng Zhong and Anlin Wang

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703004

• Abstract
• PDF (420.8 KB)
• References

Open Access

Research Method of Assembly Sequence Planning Based on Assembly Constraint Relationship Analysis 03005

Yang Yi, Xiaojun Liu, Zhonghua Ni, Xia Tang and Xiaokang Xu

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703005

• Abstract
• PDF (409.8 KB)
• References

Open Access

Study on the frame load spectrum combining mileage and percentile extrapolation 03006

Qingchun Song, Zhenghe Song and Yuefeng Du

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703006

• Abstract
• PDF (1.148 MB)
• References

Open Access

An Electromechanical Co-Simulation Model Based on Lumped Parameter Model of Ball Screw Feed Drive System 03007

Liang Luo, Weimin Zhang, Haonan Sui and Jürgen Fleischer

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703007

• Abstract
• PDF (641.3 KB)
• References

Open Access

Designing Service Blueprint of Self-service Technology (SST) Based Public Transportation Service in Indonesia using SSTQual, Kano Model, and QFD 03008

Amalia Suzianti and Arsila Chairunnisa

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703008

• Abstract
• PDF (276.1 KB)
• References

Open Access

Kinematic Synthesis of Mechanism for System with a Technical Vision 03009

Baurzhan Tultayev, Gani Balbayev, Algazy Zhauyt, Aidos Sultan and Aigerim Mussina

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703009

• Abstract
• PDF (332.8 KB)
• References

Open Access

Optimization of Tooth Root Profile Using Bezier Curve with G2 Continuity to Reduce Bending Stress of Asymmetric Spur Gear Tooth 03010

Priyakant Vaghela and Jagdish Prajapati

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703010

• Abstract
• PDF (513.8 KB)
• References

Open Access

Design of Street Furniture for Famous Historical and Cultural Cities in the View of Cultural and Technological Integration - A Case Study on the Design of Bus Shelter in Bozhou 03011

Yaqin Xia and Changchun Yang

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703011

• Abstract
• PDF (1.533 MB)
• References

Open Access

Innovation Design and Empirical Research Based on Presentation of Lumbar Muscle Strain and Sanitation Products 03012

Ran Chen, Ming Chen and Jian-hua Lyu

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703012

• Abstract
• PDF (580.0 KB)
• References

Open Access

Ontology-based Experimental Support of Conceptual Actions in the Process Production of Aviation Parts Templates 03013

Oleg Chorakaev and Maxim Grishin

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703013

• Abstract
• PDF (516.0 KB)
• References

Open Access

The Design of Large Arc-shape High-precision Walking Device in TV (thermal-vacuum) Conditions 03014

Xue Lian, Nan Hua, Liu Jiaqi, Liu Xin and Meng Gang

Published online: 26 November 2018

DOI: https://doi.org/10.1051/matecconf/201823703014

• Abstract
• PDF (1.236 MB)
• References