Open Access
| Issue |
MATEC Web Conf.
Volume 237, 2018
2018 3rd International Conference on Design, Mechanical and Material Engineering (D2ME 2018)
|
|
|---|---|---|
| Article Number | 03010 | |
| Number of page(s) | 6 | |
| Section | Chapter 3: Design Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201823703010 | |
| Published online | 26 November 2018 | |
- Dudley Darle, Handbook of Practical Gear Design, (Ist Edition, CRC Press London,(2009) [Google Scholar]
- A. Kapelevich, “Geometry and design of involute spur gears with asymmetric teeth” Mechanism and Machine Theory 35,117-130, (2000) [Google Scholar]
- F. Litvin,Q. Lian, A. Kapelevich,“Asymmetric modified spur gear drives: reduction of noise, localization of contact, simulation of meshing and stress analysis” Computer Methods Applied Mechanics and Engineering. 188,363-390, (2000) [CrossRef] [Google Scholar]
- Th. Costopoulos, V. Spitas “Reduction of gear fillet stresses by using one-sided involute asymmetric teeth”, Mechanism and Machine Theory 44,1524-1534, (2009) [Google Scholar]
- N. Pedersen, “Improving bending stress in spur gears using asymmetric gears and Shape optimization” Mechanism and Machine Theory 45,1707-1720, (2010) [CrossRef] [Google Scholar]
- V. Senthil Kumar, D. Muni, G. Muthuveerappan “Optimization of asymmetric spur gear drives to improve the bending load capacity” Mechanism and Machine Theory 43,829-858,(2008) [CrossRef] [Google Scholar]
- A. Kawalec, J. Wiktor, D. Ceglarek,” Comparative Analysis of Tooth-Root Strength Using ISO and AGMA Standards in Spur and Helical Gears With FEM-based Verification”, Journal of Mechanical Design, 128 (2006) [Google Scholar]
- V. Spitas, Th Costopoulos and C. Spitas, “Increasing the Strength of Standard Involute Gear Teeth with Novel Circular Root Fillet Design”, American Journal of Applied Sciences 2, 6,1058-1064, (2005) [Google Scholar]
- ISO 6336 Standard, Calculation of Load Capacity of Spur and Helical Gears [Google Scholar]
- Lizheng Lu, “Optimal multi-degree reduction of Bezier curve with G2 continuty” Computer aided geometric design, 23,673-683,(2006) [CrossRef] [Google Scholar]
- D.Rogers, J. Adams, Mathematical element for computer graphics, (1990) [Google Scholar]
- T. Zou, “Optimization of tooth root profile of spur gears for maximum load-carrying capacity”, Proceedings of ASME International design engineering technical conference and computers and information in engineering conference, (2014) [Google Scholar]
- P.Vaghela, Master degree thesis “Effect of rim thickness on asymmetric spur gear tooth bending stress”, Gujarat technological university, (2011) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.