Issue |
MATEC Web Conf.
Volume 237, 2018
2018 3rd International Conference on Design, Mechanical and Material Engineering (D2ME 2018)
|
|
---|---|---|
Article Number | 02014 | |
Number of page(s) | 6 | |
Section | Chapter 2: Material Engineering | |
DOI | https://doi.org/10.1051/matecconf/201823702014 | |
Published online | 26 November 2018 |
Influence of Process Parameters of Printing on Mechanical Properties of Plastic Parts Produced by FDM 3D Printing Technology
1 Brno University of Technology, Technicka 2, 61669 Brno, Czech Republic
a Corresponding author: vosynek@fme.vutbr.cz
Fused Deposition Modelling (FDM) is a fast-growing 3D printing technology. This technology expands rapidly even in households. Most users set print parameters only according to their own experience, regardless of the final mechanical properties. In order to predict the mechanical behaviour of the FDM-printed components, it is important to understand not only the properties of the printing material but also the effect of the printing process parameters on the mechanical properties. Components manufactured by FDM technology have an anisotropic structure, therefore the filling angle, fill shape, air gap, print orientation, and print temperature affect the resulting mechanical properties. This work deals with the change of mechanical properties depending on the setting of the filling angle, the shape of the filling, the orientation of the parts during printing, the influence of the material and pigment manufacturer.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.