Issue |
MATEC Web Conf.
Volume 237, 2018
2018 3rd International Conference on Design, Mechanical and Material Engineering (D2ME 2018)
|
|
---|---|---|
Article Number | 01003 | |
Number of page(s) | 6 | |
Section | Chapter 1: Mechanical Engineering | |
DOI | https://doi.org/10.1051/matecconf/201823701003 | |
Published online | 26 November 2018 |
Experimental Investigation and Performance Analysis of Ceramic Inserts in Laser Assisted Turning of Waspaloy
Poznan University of Technology, Piotrowo 3 St., 60-965 Poznan, Poland
a Corresponding author: martyna.r.wiciak@doctorate.put.poznan.pl
In this paper, the influence of laser assisted turning of hard-to-cut nickel-based superalloy on tool cutting ability was presented. The conducted research involved the machining performance along with tool life of ceramic inserts during turning of heat-resistant alloy under a trade name Waspaloy. The ceramic insert with geometry in accordance with the ISO – RPGX 120700 T01020 were applied during longitudinal turning with laser beam. The investigations has been completed with various cutting conditions such as laser power P, cutting speed vc, feed f and depth of cut ap. In order to determine the relations between the tool wear and cutting time, the tool life T has been selected. The increment of tool wear was correlated with the change of vibration signals and the critic points of tool wear was presented. In addition, the shape and form of chip was evaluated based on macroscopic observation and SEM analyses. The conducted research was primarily focused on effective application of ceramic inserts during turning Waspaloy with laser beam and comparison this technology with conventional machining.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.