MATEC Web of Conferences

Liberata Guadagno, Luigi Vertuccio, Carlo Naddeo, Elisa Calabrese, Giuseppina Barra, Marialuigia Raimondo, Andrea Sorrentino, Wolfgang H. Binder, Philipp Michael and Sravendra Rana

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300021

Open Access

Nanocomposites conductivity point measurement using Tunneling AFM (TUNA) 00022

Marialuigia Raimondo, Liberata Guadagno, Luigi Vertuccio, Carlo Naddeo, Giuseppina Barra, Giovanni Spinelli, Patrizia Lamberti, Vincenzo Tucci and Khalid Lafdi

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300022

Open Access

Electrical characterization of aeronautical nanocomposites supported by Tunneling AFM (TUNA) 00023

Patrizia Lamberti, Giuseppina Barra, Liberata Guadagno, Khalid Lafdi, Carlo Naddeo, Marialuigia Raimondo, Giovanni Spinelli, Vincenzo Tucci and Luigi Vertuccio

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300023

Open Access

Multidisciplinary challenge in the design of a MWCNTs-based polymer smart structure 00024

Maurizio Arena, Massimo Viscardi, Liberata Guadagno, Luigi Vertuccio and Giuseppina Barra

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300024

Open Access

A parametric prediction of the Young’s modulus of polymers enhanced with ΜWCNTs 00025

P.V. Polydoropoulou, K.I. Tserpes, Sp.G. Pantelakis and Ch.V. Katsiropoulos

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300025

Open Access

Electric Aircraft: Exploiting the Synergy between Powertrain, Energy Management and Structure 00026

Teresa Donateo, Claudia Lucia De Pascalis and Antonio Ficarella

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300026

Open Access

Wing and propeller aerodynamic interaction through nonlinear lifting line theory and blade element momentum theory 00027

Hospodář Pavel, Klesa Jan and Žižkovský Nikola

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300027

Open Access

Optimal Sizing of Electric Multirotor Configurations 00028

Giulio Avanzini, Emanuele L. de Angelis, Fabrizio Giulietti and Edmondo Minisci

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300028

Open Access

Prediction of mechanical properties of nanocrystalline materials using Voronoi FE models of representative volume elements 00029

Panagiotis Bazios, Konstantinos Tserpes and Spiros Pantelakis

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300029

Open Access

Innovative passive multifrequency propeller device for noise and vibration reduction in turboprop fuselage 00030

Angelo De Fenza, Maurizio Arena and Leonardo Lecce

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300030

Open Access

Wire-arc additive manufacturing of Al-Mg alloy using CMT and PMC technologies 00031

Bianca F. Gomes, Paulo J. Morais, Vítor Ferreira, Margarida Pinto and Luiz H. de Almeida

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201823300031

Open Access

A Two-Level Non-Intrusive Coupling Method for Fatigue Analysis 00032

Yanjie Liu and Qin Sun

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201823300032

Open Access

Erratum

Erratum to: A Review on Nondestructive Techniques and Characteristics of Composite Materials for the Aerospace System 00033

Jaishree Vyas and Rymantas Jonas Kažys

Published online: 18 December 2020

DOI: https://doi.org/10.1051/matecconf/201823300033

PDF (146.3 KB)

MATEC Web of Conferences

Volume 233 (2018)

8^th EASN-CEAS International Workshop on Manufacturing for Growth & Innovation

Statement of Peer review

UAS as flexible and innovative test platform for aircraft configuration and systems testing 00001

Evaluations on adequacy and utility of Failure Modes and Effects and Criticality Analysis and Fault Tree Analysis methodologies applied to civil RPAS systems 00002

A Review on Nondestructive Techniques and Characteristics of Composite Materials for the Aerospace System 00003

Environmental and financial performance evaluation of a helicopter’s canopy production using different materials and manufacturing processes 00004

Advanced OoA and Automated Technologies for the Manufacturing of a Composite Outer Wing Box 00005

Dynamic Force Analysis of a Novel Mechanism for Chord and Camber Morphing Wing Under Aerodynamic Loading 00006

Development of a real time intelligent health monitoring platform for aero-engine 00007

Trade-off study of a variation aware determinate wing assembly against a traditional assembly strategy 00008

FASTEN: an IoT platform for manufacturing. Embraer use case 00009

Framework for the Simulation of an Aircraft Final Assembly Line 00010

Design challenge of a new monolithic concept for the main landing gear bay of a large passenger aircraft 00011

Feasibility investigation of a smart thermoacoustic configuration for general aviation aircrafts 00012

PANDORA - A python based framework for modelling and structural sizing of transport aircraft 00013

Preliminary Sizing of a Medium Range Blended Wing-Body using a Multidisciplinary Design Analysis Approach 00014

Integrated collaboration capabilities for competitive aircraft design 00015

A Simplified Monitor Model for EMA Prognostics 00016

New prognostic neural method by discrete wavelet transforms for electromechanical flight controls affected by progressive faults 00017

Aerodynamic and structural design of winglet with integrated VHF antenna 00018

Multifunctional and lightweight load-bearing composite structures for satellites 00019

Challenges of fully-coupled high-fidelity ditching simulations 00020

Development of aeronautical epoxy nanocomposites having an integrated selfhealing ability 00021

Nanocomposites conductivity point measurement using Tunneling AFM (TUNA) 00022

Electrical characterization of aeronautical nanocomposites supported by Tunneling AFM (TUNA) 00023

Multidisciplinary challenge in the design of a MWCNTs-based polymer smart structure 00024

A parametric prediction of the Young’s modulus of polymers enhanced with ΜWCNTs 00025

Electric Aircraft: Exploiting the Synergy between Powertrain, Energy Management and Structure 00026

Wing and propeller aerodynamic interaction through nonlinear lifting line theory and blade element momentum theory 00027

Optimal Sizing of Electric Multirotor Configurations 00028

Prediction of mechanical properties of nanocrystalline materials using Voronoi FE models of representative volume elements 00029

Innovative passive multifrequency propeller device for noise and vibration reduction in turboprop fuselage 00030

Wire-arc additive manufacturing of Al-Mg alloy using CMT and PMC technologies 00031

A Two-Level Non-Intrusive Coupling Method for Fatigue Analysis 00032

Erratum to: A Review on Nondestructive Techniques and Characteristics of Composite Materials for the Aerospace System 00033

MATEC Web of Conferences

Volume 233 (2018)

8th EASN-CEAS International Workshop on Manufacturing for Growth & Innovation

Statement of Peer review

UAS as flexible and innovative test platform for aircraft configuration and systems testing 00001

Evaluations on adequacy and utility of Failure Modes and Effects and Criticality Analysis and Fault Tree Analysis methodologies applied to civil RPAS systems 00002

A Review on Nondestructive Techniques and Characteristics of Composite Materials for the Aerospace System 00003

Environmental and financial performance evaluation of a helicopter’s canopy production using different materials and manufacturing processes 00004

Advanced OoA and Automated Technologies for the Manufacturing of a Composite Outer Wing Box 00005

Dynamic Force Analysis of a Novel Mechanism for Chord and Camber Morphing Wing Under Aerodynamic Loading 00006

Development of a real time intelligent health monitoring platform for aero-engine 00007

Trade-off study of a variation aware determinate wing assembly against a traditional assembly strategy 00008

FASTEN: an IoT platform for manufacturing. Embraer use case 00009

Framework for the Simulation of an Aircraft Final Assembly Line 00010

Design challenge of a new monolithic concept for the main landing gear bay of a large passenger aircraft 00011

Feasibility investigation of a smart thermoacoustic configuration for general aviation aircrafts 00012

PANDORA - A python based framework for modelling and structural sizing of transport aircraft 00013

Preliminary Sizing of a Medium Range Blended Wing-Body using a Multidisciplinary Design Analysis Approach 00014

Integrated collaboration capabilities for competitive aircraft design 00015

A Simplified Monitor Model for EMA Prognostics 00016

New prognostic neural method by discrete wavelet transforms for electromechanical flight controls affected by progressive faults 00017

Aerodynamic and structural design of winglet with integrated VHF antenna 00018

Multifunctional and lightweight load-bearing composite structures for satellites 00019

Challenges of fully-coupled high-fidelity ditching simulations 00020

Development of aeronautical epoxy nanocomposites having an integrated selfhealing ability 00021

Nanocomposites conductivity point measurement using Tunneling AFM (TUNA) 00022

Electrical characterization of aeronautical nanocomposites supported by Tunneling AFM (TUNA) 00023

Multidisciplinary challenge in the design of a MWCNTs-based polymer smart structure 00024

A parametric prediction of the Young’s modulus of polymers enhanced with ΜWCNTs 00025

Electric Aircraft: Exploiting the Synergy between Powertrain, Energy Management and Structure 00026

Wing and propeller aerodynamic interaction through nonlinear lifting line theory and blade element momentum theory 00027

Optimal Sizing of Electric Multirotor Configurations 00028

Prediction of mechanical properties of nanocrystalline materials using Voronoi FE models of representative volume elements 00029

Innovative passive multifrequency propeller device for noise and vibration reduction in turboprop fuselage 00030

Wire-arc additive manufacturing of Al-Mg alloy using CMT and PMC technologies 00031

A Two-Level Non-Intrusive Coupling Method for Fatigue Analysis 00032

Erratum to: A Review on Nondestructive Techniques and Characteristics of Composite Materials for the Aerospace System 00033

8^th EASN-CEAS International Workshop on Manufacturing for Growth & Innovation