MATEC Web Conf.
Volume 130, 2017The International Conference on Composite Material, Polymer Science and Engineering (CMPSE2017)
|Number of page(s)||4|
|Section||Concrete and asphalt materials|
|Published online||25 October 2017|
Preparation and Characterization of Manganese Slag and Fly Ash-based Geopolymer
Beifang University of Nationalities, Yinchuan 750021, China
a Corresponding author: email@example.com
In this study, a series of manganese slag and fly ash-based geopolymers were prepared though alkali activation by varing the amount of manganese slag. The 3-day, 7-day and 14-day compressive strengths of these samples were tested. The maximum strength of 42.78 MPa was obtained at 14th days of testing when 455 g of fly ash, 195g of manganese slag, 20% of the alkali content , the curing temperature of 100°C, the curing time of 12h were used. XRD and FTIR characterization results shown that the polymerization reaction occurs between the glassiness in the manganese slag and the fly ash while adding alkali activator, and the main structure formed was Ca-A-S-H, which contributed the major strength in manganese slag and fly ash-based geopolymer.
© The authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.