Open Access
MATEC Web Conf.
Volume 253, 2019
2018 International Conference on Materials Science and Manufacturing Engineering (MSME 2018)
Article Number 03003
Number of page(s) 9
Section Material Manufacturing & Process
Published online 14 January 2019
  1. Fuster, V., Top 10 cardiovascular therapies and interventions for the next decade. Nature Reviews Cardiology, 2014. 11(11): P. 671–683. [CrossRef] [Google Scholar]
  2. Li, M., A novel technique of endovascular treatment for the cerebral aneurysm: the development of covered stent specially designed for intracranial vasculature. Journal of Interventional Radiology, 2010. 19(4): P. 253–256. [Google Scholar]
  3. Guo, Y. and Z. Tan, Features of endovascular stent materials and their therapeutic effects on ischemic stroke. Journal of Clinical Rehabilitative Tissue Engineering Research, 2013. 17(12): P. 2257–2264. [Google Scholar]
  4. Mei, M., Characteristics and clinical application of different types of cerebral vascular scaffolds. Journal of Clinical Rehabilitative Tissue Engineering Research, 2014. [Google Scholar]
  5. Liu, D., Q. Luo, and Z. Chang, Current Status and Progress of Minimally Invasive Medical Devices. Chinese Journal of Medical Instrumentation, 2008. 14(3): P. 2–11. [Google Scholar]
  6. Liu, D. and T. Xi, Current Situation and Development Tendency of Interventional Medical Device&Material Industry. Chinese Journal of Medical Instrumentation, 2006. 12(12): P. 1–14. [Google Scholar]
  7. White, G.H., et al., Endoleak as a complication of endoluminal grafting of abdominal aortic aneurysms: classification, incidence, diagnosis, and management. Journal of Endovascular Surgery the Official Journal of the International Society for Endovascular Surgery, 1997. 4(2): p. 152. [Google Scholar]
  8. Coppi, G., et al., Experience with the Stentor endograft at four Italian centers. J Endovasc Surg, 1998. 5(3): P. 206–215. [CrossRef] [Google Scholar]
  9. Roos, J.E., et al., Detection of endograft fractures with multidetector row computed tomography. Journal of Vascular Surgery, 2005. 42(5): P. 1002–1006. [CrossRef] [Google Scholar]
  10. Junnarkar, S.P., et al., Endovascular repair for acute symptomatic and ruptured abdominal aortic aneurysms. Ulster Medical Journal, 2001. 70(1): P. 51–53. [Google Scholar]
  11. Duda, S.H., et al., Physical Properties of Endovascular Stents: An Experimental Comparison. Journal of Vascular & Interventional Radiology, 2000. 11(5): P. 645–654. [CrossRef] [Google Scholar]
  12. Sigwart, U., et al., Intravascular stents to prevent occlusion and restenosis after transluminal angioplasty. N Engl J Med, 1987. 316(12): P. 701–706. [CrossRef] [Google Scholar]
  13. M, F., et al., A new austenitic stainless steel with negligible nickel content: an in vitro and in vivo comparative investigation. Biomaterials, 2003. 24(27): P. 4929–4939. [CrossRef] [Google Scholar]
  14. Jr, H.D., In-stent restenosis. Reviews in Cardiovascular Medicine, 2001. 2(3): P. 115–119. [Google Scholar]
  15. Pfisterer, M., et al., Late clinical events after clopidogrel discontinuation may limit the benefit of drug-eluting stents: an observational study of drug-eluting versus bare-metal stents. Journal of the American College of Cardiology, 2006. 48(12): P. 2584–2591. [CrossRef] [Google Scholar]
  16. Johnson, J. CYPHER™ Sirolimus-eluting Coronary Stent on RAPTORTM Over-the-Wire Delivery System. 2003; Available from: [Google Scholar]
  17. Scientific, B. TAXUS Liberte and TAXUS Liberte Atom. 2008; Available from: [Google Scholar]
  18. Mauri, L., et al., Stent thrombosis in randomized clinical trials of drug-eluting stents. N Engl J Med, 2007. 356(10): P. 1020–1029. [CrossRef] [Google Scholar]
  19. Abbott. The XIENCEV Everolimus Eluting Coronary Stent System Instructions for Use. 2008; Available from: [Google Scholar]
  20. Rasmussen, K., et al., Efficacy and safety of zotarolimus-eluting and sirolimus-eluting coronary stents in routine clinical care (SORT OUT III): a randomised controlled superiority trial. Lancet, 2010. 375(9720): P. 1090–1099. [CrossRef] [Google Scholar]
  21. Dave, B., Bioresorbable Scaffolds: Current Evidences in the Treatment of Coronary Artery Disease. Journal of Clinical & Diagnostic Research Jcdr, 2016. 10(10): p. OE01. [Google Scholar]
  22. Caiazzo, G., et al., Absorb bioresorbable vascular scaffold: What have we learned after 5 years of clinical experience? International Journal of Cardiology, 2015. 201: P. 129–136. [CrossRef] [Google Scholar]
  23. Shrivastava, S., Medical device materials. Advanced Materials & Processes, 2004. [Google Scholar]
  24. Moliterno, D.J., Healing Achilles--sirolimus versus paclitaxel. New England Journal of Medicine, 2005. 353(7): P. 724–7. [CrossRef] [Google Scholar]
  25. Huang, M.H., S. Li, and M. Vert, Synthesis and degradation of PLA–PCL–PLA triblock copolymer prepared by successive polymerization of ε-caprolactone and -lactide. Polymer, 2004. 45(26): P. 8675–8681. [CrossRef] [Google Scholar]
  26. Jiang, w., et al., Application of L-lactic acid and its derivatives in food industry. Journal of Food [Google Scholar]
  27. Tsuji, H., Poly(l-Lactide). 2015: Springer Berlin Heidelberg. [Google Scholar]
  28. Bährlerapp, M., Springer Lexikon Kosmetik und Körperpflege. 2007, Springer Berlin Heidelberg. [CrossRef] [Google Scholar]
  29. Abbott. Absorb GT1™ Bioresorbable Vascular Scaffold (BVS) System 2016; Available from: [Google Scholar]
  30. Dun, S., Study on Micro Injection Molding Technology of Biodegradable Stent. 2013, Dalian University of Technology. [Google Scholar]
  31. Huang, B., et al., Fabricating polymer stents with injection molding. 2008, US. [Google Scholar]
  32. Yu, J.T., et al., Additive Manufacturing of Patient-Customizable Scaffolds for Tubular Tissues Using the Melt-Drawing Method. Materials, 2016. 9(11): p. 893. [CrossRef] [Google Scholar]
  33. T, Y., et al., Bifurcation lesions: two stents versus one stent--immediate and follow-up results. Journal of the American College of Cardiology, 2000. 35(5): P. 1145–1151. [CrossRef] [Google Scholar]
  34. Peng, H., The Numerical Analysis on the Influence of Hemodynamic to Different Cross-sections of Struts. Journal of Biomedical Engineering Research, 2013(3): P. 158–161. [Google Scholar]
  35. Flege, C., et al., Development and characterization of a coronary polylactic acid stent prototype generated by selective laser melting. Journal of Materials Science Materials in Medicine, 2013. 24(1): P. 241–255. [CrossRef] [Google Scholar]
  36. Su, A.P., et al., In vivo evaluation and characterization of a bio-absorbable drug-coated stent fabricated using a 3D-printing system. Materials Letters, 2015. 141: P. 355–358. [CrossRef] [Google Scholar]
  37. Tumbleston, J.R., et al., Additive manufacturing. Continuous liquid interface production of 3D objects. Science, 2015. 347(6228): P. 1349–1352. [CrossRef] [Google Scholar]
  38. Van Lith, R., et al., 3D‐Printing Strong High‐Resolution Antioxidant Bioresorbable Vascular Stents. Advanced Materials Technologies, 2017. 1(9): p. 1600138. [CrossRef] [Google Scholar]
  39. Ware, H.O.T. and C. Sun. Process development for high-resolution 3D-printing of bioresorbable vascular stents. in SPIE OPTO. 2017. [Google Scholar]
  40. Cabrera, M.M., et al., Computationally designed 3D printed self-expandable polymer stents with biodegradation capacity for minimally invasive heart valve implantation:A proof-of-concept study. 2017. [Google Scholar]
  41. Guerra, A.J. and J. Ciurana, 3D-printed bioabsordable polycaprolactone stent: The effect of process parameters on its physical features. Materials & Design, 2017. 137. [Google Scholar]
  42. Liu, Y., et al., Composite bioabsorbable vascular stents via 3D bio-printing and electrospinning for treating stenotic vessels. Journal of Southeast University, 2015(2): P. 254–258. [Google Scholar]
  43. Tangdu Hospital completed the world's first 3D printed extravascular stent implantation for Nutcracker Syndrome. Journal of The Fourth Military Medical University, 2016(1): P. 4–4. [Google Scholar]
  44. Liu, Q., Z. Wang, and Y. Liu, Method for the preparation of a three-dimensional porous tubular scaffolds and equipment. 2015: CN. [Google Scholar]
  45. Xu, M., et al., Fast light curing nozzle for 3D printing equipment. 2015: CN. [Google Scholar]
  46. Kang, S., Research on 3D printing equipment and forming technology of personalized biorebsorblable stent. 2018, Tsinghua University. [Google Scholar]
  47. Anagnostopoulos, C.E., M.J.S. Prabhakar, and C.F. Kittle, Aortic dissections and dissecting aneurysms. American Journal of Cardiology, 1972. 30(3): P. 263–73. [CrossRef] [Google Scholar]
  48. Wang, S., et al., Short-term curative effect of endovascular stent-graft treatment for aortic diseases in China: a systematic review. Plos One, 2013. 8(8): p. e71012. [CrossRef] [Google Scholar]
  49. Jamshidi, P., K. Mahmoody, and P. Erne, Covered stents: a review. International Journal of Cardiology, 2008. 130(3): P. 310–318. [CrossRef] [Google Scholar]
  50. Chen, X., Research of Customized Aortic Stent Graft Manufacture. 2017, Tsinghua University. [Google Scholar]
  51. Li, R., Structure analysis of different textile-based artificial vascular. Progress in Textile Science & Technology, 2007(6): P. 17–17. [Google Scholar]
  52. Wang, F., Desigh and Properties of Branched Graft for Endovascular Prostheses Application. 2014, Donghua University. [Google Scholar]
  53. Wang, L., Design and Process Investigation on a New Type of Thoracic Stent. 2013, Dalian University of Technology. [Google Scholar]
  54. Zhang, L., Fabrication and fundamental research of multi-branched blood vessel scaffolds with multi-layered wall. 2006, Tsinghua University. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.