Free Access to the whole issue

MATEC Web of Conferences

Volume 163 (2018)

MATBUD’2018 – 8^th Scientific-Technical Conference on Material Problems in Civil Engineering

Cracow, Poland, June 25-27, 2018
I. Hager and T. Tracz (Eds.)

ISBN: 978-2-7598-9052-1

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 15 June 2018

PDF (41.8 KB)

Open Access

Preface 00001

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816300001

PDF (163.0 KB)

New Generation Concretes

Open Access

On site deployment of 3D printing for the building construction – The case of Yhnova^TM 01001

Philippe Poullain, Elodie Paquet, Sébastien Garnier and Benoît Furet

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816301001

Open Access

Evaluation of suitability for 3D printing of high performance concretes 01002

Maria Kaszyńska, Marcin Hoffmann, Szymon Skibicki, Adam Zieliński, Mateusz Techman, Norbert Olczyk and Tomasz Wróblewski

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816301002

Open Access

Influence of the w/c ratio and aggregate composition on the autogenous shrinkage in self-consolidating concrete 01003

Adam Zielinski and Maria Kaszynska

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816301003

Open Access

Low cement content SCC (Eco-SCC) – the alternative for ready-mix traditional concrete 01004

Maciej Urban

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816301004

Modeling of Concrete Behavior and Test Methods

Open Access

Influence of tensile cracking and of aggregate size on concrete permeability 02001

Marta Choinska, Hayder Al-Khazraji, Nathan Benkemoun and Abdelhafid Khelidj

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816302001

Open Access

Application of the nanoindentation method in assessing of properties of cement composites modified with silica-magnetite nanostructures 02002

Elzbieta Horszczaruk, Roman Jedrzejewski, Jolanta Baranowska and Ewa Mijowska

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816302002

Open Access

Failure mode in shear of steel fiber reinforced concrete beams 02003

Julita Krassowska and Marta Kosior-Kazberuk

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816302003

Open Access

Concrete propensity to fire spalling: testing and observations 02004

Izabela Hager, Katarzyna Mróz and Tomasz Tracz

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816302004

Open Access

High frequency impulse ground penetrating radar application in assessment of interlayer connections 02005

Jacek Sudyka, Lech Krysiński, Adam Zofka, Marek Pszczoła and Piotr Jaskuła

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816302005

Open Access

Assessment of the compressive strength of lime mortar in the joints of brick walls - case study 02006

Dawid Łątka and Piotr Matysek

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816302006

Waste Products as Components of Sustainable Building Materials

Open Access

Towards the utilization of waste glass powder in sustainable cement based overlays 03001

Łukasz Sadowski

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816303001

Open Access

Assessing the Performance of Concrete Containing Recycled Glass on Tensile Splitting Strength and Resistance to Alkali Silica Reaction 03002

Chun-Hsing Ho, Anas Almonnieay, Khin Kyaw and Phoo Myat Sandy Maung

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816303002

Open Access

Chemical testing of post-process ashes from municipal waste combustion 03003

Teresa Stryszewska and Marta Dudek

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816303003

Open Access

Physical properties of post-process fly ash from TWTP Krakow 03004

Aneta Nowak-Michta and Brygida Kabat

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816303004

Open Access

Influence of cement substitution by calcareous fly ash on the mechanical properties of polymer-cement composites 03005

Beata Jaworska, Paweł Łukowski and Jerzy Jaworski

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816303005

Open Access

Lightweight concrete with copper slag waste as sand substitution 03006

Roman Jaskulski and Wojciech Kubissa

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816303006

Open Access

Application of ceramic dust as a modifier reducing the extent of rheological deformations in airfield pavement concrete 03007

Małgorzata Linek

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816303007

Open Access

Assessment of preliminary suitability of Fe-and Cr-rich waste material for the production of building ceramics 03008

Ewelina Kłosek-Wawrzyn and Paweł Murzyn

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816303008

Cement Pastes and Mortars

Open Access

Hydration degree development of blast furnace slag blended cement pastes using thermogravimetric Analysis (TGA) 04001

Walid Deboucha, Nordine Leklou and Abdelhafid Khelidj

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816304001

Open Access

The impact of lithium nitrate on the physical and mechanical properties of Portland cement) 04002

Justyna Zapała-Sławeta and Zdzisława Owsiak

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816304002

Open Access

Effect of boron-containing aggregates on setting and hardening of Portland cement mortars 04003

Aneta Antolik, Michał A. Glinicki and Marek Gawlicki

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816304003

Open Access

Influence of temperature on the properties of non-air-entrained and air-entrained cement mortars modified with different plasticisers and superplasticisers types 04004

Beata Łaźniewska-Piekarczyk

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816304004

Open Access

Effect of redispersible polymer powder on setting time of thin-bed mortars 04005

Marcin Kulesza, Dawid Dębski and Jadwiga Fangrat

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816304005

Open Access

Hydrophobisation of mortars containing waste polyurethane foam 04006

Danuta Barnat-Hunek, Sylwia Duda, Monika Garbacz and Grzegorz Łagód

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816304006

Durability and Environmental Impact

Open Access

Frost resistance of concretes containing ground granulated blast-furnace slag 05001

Paweł Łukowski, Ali Salih and Joanna J. Sokołowska

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305001

Open Access

The impact of air content on the durability of concrete under combined sulphate and freezethaw attack 05002

Julia Marczewska and Wojciech Piasta

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305002

Open Access

Chemical corrosion of external stairs – case study 05003

Przemysław Czapik and Zdzisława Owsiak

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305003

Open Access

Calcarreous Fly Ash Content Signifacence To Self-Terminating Carbonation Model Of Concrete 05004

Paweł Woliński, Piotr Woyciechowski and Grzegorz Adamczewski

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305004

Open Access

Influence of cement type on carbonation of concrete mixtures 05005

Christos Tassos, Kosmas Sideris, Alexandros Chatzopoulos, Nikolaos Pistofidis and Emmanouil Chaniotakis

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305005

Open Access

Analysis of protective features of concrete in precast prestressed floor slabs (HC type) against chloride penetration 05006

Zofia Szweda

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305006

Open Access

The content of chlorides in blast-furnace slag cement as a factor affecting the diffusion of chloride ions in concrete 05007

Justyna Kuziak, Piotr Woyciechowski, Rafał Kobyłka and Aldona Wcisło

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305007

Open Access

The influence of metahalloysite addition on tobermorite formation studied by X-ray powder diffraction and scanning electron microscope 05008

Anna Skawińska

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305008

Open Access

Alkali-silica reaction and microstructure of concrete subjected to combined chemical and physical exposure conditions 05009

Daria Jóźwiak-Niedźwiedzka, Mariusz Dąbrowski, Karolina Gibas, Aneta Antolik and Michał A. Glinicki

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305009

Open Access

Impact of the air-entrained concrete with the blast-furnace slag cement on the intensity of reinforcement corrosion process 05010

Wioletta Raczkiewicz, Wioletta Grzmil and Justyna Zapała – Sławeta

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305010

Open Access

Application of acrylic-based coatings for concrete protection 05011

Aleksander Kozak

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305011

Open Access

Evaluating the Influence of Polymer Modified Asphalt Binders on Low Temperature Properties 05012

Amal Abdelaziz, Chun-Hsing Ho and Matthew Snyder

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816305012

Geopolymers and Soil-Cement Materials

Open Access

Resistance to external sulfate attack - Comparison of two alkali-activated binders 06001

Miroslav Komljenović, Nataša Džunuzović and Violeta Nikolić

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816306001

Open Access

Study of an alkali-activated binder based on tungsten mining mud and brick powder waste 06002

Naim Sedira and João Castro-Gomes

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816306002

Open Access

Influence of water to solid ratio on mechanical properties of GBFS-based geopolymer foam concrete 06003

Tomasz Piotrowski and Piotr Prochoń

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816306003

Open Access

Effect of High Temperature on Mechanical Properties of Geopolymer Mortar 06004

Mateusz Sitarz, Izabela Hager and Joanna Kochanek

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816306004

Open Access

The Effect of Additives on the Properties of Metakaolin and Fly Ash Based Geopolymers 06005

Michał Łach, Kinga Korniejenko, Maria Hebdowska-Krupa and Janusz Mikuła

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816306005

Open Access

Influence of Soil-Cement Composition on its Selected Properties 06006

Krystian Brasse, Tomasz Tracz, Tomasz Zdeb and Piotr Rychlewski

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816306006

Open Access

Toward a better understanding of the effects of cement treatment on microstructural and hydraulic properties of compacted soils 06007

Harifidy Ranaivomanana and Andry Razakamanantsoa

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816306007

Structural Materials Performance Evaluation

Open Access

The influence of an applied standard test method on a measurement of concrete stabilized secant modulus of elasticity 07001

Lucyna Domagała and Justyna Dobrowolska

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816307001

Open Access

Usefulness of porphyry and amphibolites as a component of concrete for airfield pavements 07002

Małgorzata Linek, Piotr Nita, Paweł Wolka and Wojciech Żebrowski

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816307002

Open Access

Probability calibration of deformation factor for timber roofs in the Polish mountain zones 07003

Tomasz Domański and Kamil Kmiecik

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816307003

Open Access

Material properties and the energy balance in standardized fire testing 07004

Wojciech Węgrzyński and Piotr Turkowski

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816307004

Open Access

Rational application of hot finished rectangular hollow sections in steel structures 07005

Krzysztof Kuchta and Izabela Tylek

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816307005

Energy-Efficient Building Materials

Open Access

Energy and hygrothermal performance of builtin mineral wool thermal insulations 08001

Balázs Nagy and Tamás K. Simon

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816308001

Open Access

Multifunctional decorative coatings based on cement-silicate binder 08002

Arina Shaybadullina, Grygory Yakovlev, Valery Grakhov, Irina Polyanskikh and Yuliya Ginchitskaya

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816308002

Open Access

Influence of Load-bearing Structure on Size of Bonded Facade Cladding 08003

Pavel Liška, Barbora Nečasová and Jiří Šlanhof

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816308003

Open Access

Impact resistance of external thermal insulation systems 08004

Ewa Sudoł, Dawid Dębski, Renata Zamorowska and Barbara Francke

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816308004

Open Access

Inverted roof insulation kits and their durability 08005

Barbara Francke and Robert Geryło

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816308005

Open Access

Hygrothermal modelling of masonry blocks filled with thermal insulation 08006

Balázs Nagy

Published online: 15 June 2018

DOI: https://doi.org/10.1051/matecconf/201816308006

MATEC Web of Conferences

Volume 163 (2018)

MATBUD’2018 – 8th Scientific-Technical Conference on Material Problems in Civil Engineering

Statement of Peer review

Preface 00001

New Generation Concretes

On site deployment of 3D printing for the building construction – The case of YhnovaTM 01001

Evaluation of suitability for 3D printing of high performance concretes 01002

Influence of the w/c ratio and aggregate composition on the autogenous shrinkage in self-consolidating concrete 01003

Low cement content SCC (Eco-SCC) – the alternative for ready-mix traditional concrete 01004

Modeling of Concrete Behavior and Test Methods

Influence of tensile cracking and of aggregate size on concrete permeability 02001

Application of the nanoindentation method in assessing of properties of cement composites modified with silica-magnetite nanostructures 02002

Failure mode in shear of steel fiber reinforced concrete beams 02003

Concrete propensity to fire spalling: testing and observations 02004

High frequency impulse ground penetrating radar application in assessment of interlayer connections 02005

Assessment of the compressive strength of lime mortar in the joints of brick walls - case study 02006

Waste Products as Components of Sustainable Building Materials

Towards the utilization of waste glass powder in sustainable cement based overlays 03001

Assessing the Performance of Concrete Containing Recycled Glass on Tensile Splitting Strength and Resistance to Alkali Silica Reaction 03002

Chemical testing of post-process ashes from municipal waste combustion 03003

Physical properties of post-process fly ash from TWTP Krakow 03004

Influence of cement substitution by calcareous fly ash on the mechanical properties of polymer-cement composites 03005

Lightweight concrete with copper slag waste as sand substitution 03006

Application of ceramic dust as a modifier reducing the extent of rheological deformations in airfield pavement concrete 03007

Assessment of preliminary suitability of Fe-and Cr-rich waste material for the production of building ceramics 03008

Cement Pastes and Mortars

Hydration degree development of blast furnace slag blended cement pastes using thermogravimetric Analysis (TGA) 04001

The impact of lithium nitrate on the physical and mechanical properties of Portland cement) 04002

Effect of boron-containing aggregates on setting and hardening of Portland cement mortars 04003

Influence of temperature on the properties of non-air-entrained and air-entrained cement mortars modified with different plasticisers and superplasticisers types 04004

Effect of redispersible polymer powder on setting time of thin-bed mortars 04005

Hydrophobisation of mortars containing waste polyurethane foam 04006

Durability and Environmental Impact

Frost resistance of concretes containing ground granulated blast-furnace slag 05001

The impact of air content on the durability of concrete under combined sulphate and freezethaw attack 05002

Chemical corrosion of external stairs – case study 05003

Calcarreous Fly Ash Content Signifacence To Self-Terminating Carbonation Model Of Concrete 05004

Influence of cement type on carbonation of concrete mixtures 05005

Analysis of protective features of concrete in precast prestressed floor slabs (HC type) against chloride penetration 05006

The content of chlorides in blast-furnace slag cement as a factor affecting the diffusion of chloride ions in concrete 05007

The influence of metahalloysite addition on tobermorite formation studied by X-ray powder diffraction and scanning electron microscope 05008

Alkali-silica reaction and microstructure of concrete subjected to combined chemical and physical exposure conditions 05009

Impact of the air-entrained concrete with the blast-furnace slag cement on the intensity of reinforcement corrosion process 05010

Application of acrylic-based coatings for concrete protection 05011

Evaluating the Influence of Polymer Modified Asphalt Binders on Low Temperature Properties 05012

Geopolymers and Soil-Cement Materials

Resistance to external sulfate attack - Comparison of two alkali-activated binders 06001

Study of an alkali-activated binder based on tungsten mining mud and brick powder waste 06002

Influence of water to solid ratio on mechanical properties of GBFS-based geopolymer foam concrete 06003

Effect of High Temperature on Mechanical Properties of Geopolymer Mortar 06004

The Effect of Additives on the Properties of Metakaolin and Fly Ash Based Geopolymers 06005

Influence of Soil-Cement Composition on its Selected Properties 06006

Toward a better understanding of the effects of cement treatment on microstructural and hydraulic properties of compacted soils 06007

Structural Materials Performance Evaluation

The influence of an applied standard test method on a measurement of concrete stabilized secant modulus of elasticity 07001

Usefulness of porphyry and amphibolites as a component of concrete for airfield pavements 07002

Probability calibration of deformation factor for timber roofs in the Polish mountain zones 07003

Material properties and the energy balance in standardized fire testing 07004

Rational application of hot finished rectangular hollow sections in steel structures 07005

Energy-Efficient Building Materials

Energy and hygrothermal performance of builtin mineral wool thermal insulations 08001

Multifunctional decorative coatings based on cement-silicate binder 08002

Influence of Load-bearing Structure on Size of Bonded Facade Cladding 08003

Impact resistance of external thermal insulation systems 08004

Inverted roof insulation kits and their durability 08005

Hygrothermal modelling of masonry blocks filled with thermal insulation 08006

MATBUD’2018 – 8^th Scientific-Technical Conference on Material Problems in Civil Engineering

On site deployment of 3D printing for the building construction – The case of Yhnova^TM 01001