Free Access to the whole issue

MATEC Web of Conferences

Volume 168 (2018)

XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 (AEaNMiFMaE-2018)

Rajecké Teplice, Slovakia, April 25-27, 2018
M. Malcho, J. Jandačka, R. Lenhard, K. Kaduchová, R. Nosek, L. Orman, A. Čaja, P. Ďurčanský, M. Holubčík, M. Patsch, P. Pilát and P. Nemec (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 23 May 2018

PDF (58.2 KB)

Open Access

About the conference

Published online: 23 May 2018

PDF (741 KB)

Measurement and Calculation of State Variables in the fluid Flow

Open Access

Preface: Proceedings of the XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 00001

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816800001

Measurement and Calculation of State Variables in the Fluid Flow

Open Access

Measurement of Thermal Conductivity of Sludge and Liquid Materials 01001

Mária Čarnogurská, Miroslav Příhoda, Tomáš Brestovič, Marián Lázár, Natália Jasminská, Jiří Marek and Dušan Puškár

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816801001

Open Access

Temperature measurement in the flowing medium 01002

Kamil Sedlák and Lenka Fialová

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816801002

Open Access

Theory of Transport of Conteiners in Pipelines 01003

František Klimenda, Josef Soukup and Lenka Rychlíková

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816801003

Modelling and Simulation in Fluid Mechanics and Energy

Open Access

Controlled outflow of storm water without flooding 02001

Karel Adámek, Jan Kolář and Pavel Peukert

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802001

Open Access

Natural Convection Heat Transfer Around a Horizontal Circular Cylinder for the Case of Constant Surface Temperature of the Cylinder Near a Vertical Wall 02002

Marcel Novomestsky, Roman Banovčan, Andrej Kapjor and Helena Smatanová

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802002

Open Access

Analysis and Simulation of Forced Ventilation in Special Condition 02003

Miroslav Rimár, Andrii Kulikov, Marcel Fedak and Milan Abraham

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802003

Open Access

Numerical simulation of induction heating thick-walled tubes 02004

Richard Lenhard, Milan Malcho and Katarína Kaduchová

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802004

Open Access

CFD prediction of flutter of turbine blades and comparison with an experimental test case 02005

Vaclav Slama, Bartolomej Rudas, Jiri Ira, Ales Macalka, Petr Eret and Volodymyr Tsymbalyuk

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802005

Open Access

The Sonic Surface in the Inter-Blade Channel of the Last Stage Rotor Wheel in the Steam Turbine of Large Output 02006

Martin Luxa

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802006

Open Access

Effect of inlet turbulence on compressible flow through the tip-section turbine blade cascade with supersonic inlet 02007

Petr Straka, Jaromír Příhoda, David Fenderl and Bartoloměj Rudas

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802007

Open Access

Numerical modelling of transonic centripetal flow in radial turbine blade cascade 02008

Petr Straka

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802008

Open Access

Flow modelling of particulate matter by using baffles placed in the flue tract of wood stove 02009

Nikola Kantová, Alexander Čaja, Michal Holubčík and Jozef Jandačka

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802009

Open Access

Flow over evaporator in electrotechnical box 02010

Tomáš Puchor and Richard Lenhard

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802010

Open Access

Investigation of hydraulic fitting losses 02011

Marian Bojko and Milada Kozubková

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802011

Open Access

Vortex Tube: A Comparison of Experimental and CFD Analysis Featuring Different RANS Models 02012

Radomír Chýlek, Ladislav Šnajdárek and Jiří Pospíšil

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802012

Open Access

Pressure and velocity conditions in home health care accessory for babies 02013

Blanka Skočilasová, Jan Skočilas and Josef Soukup

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802013

Open Access

Basic CFD model of heat pipe 02014

Peter Hrabovský, Zuzana Kolková, Marián Mokrý and Patrik Nemec

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802014

Open Access

Simulation of Combustion Air Flow in the Gasification Biomass Boiler 02015

Marek Patsch and Peter Pilát

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816802015

Optimization of Flow Parameters in the Thermal and Hydraulic Machines and Systems

Open Access

Effect of a blade shape on hydraulic and mechanical properties of a single - blade impeller 03001

Matej Kurilla, Branislav Knížat, Zoltán Csuka and Maroš Hyriak

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816803001

Open Access

Reduction of the suction pressure of a liquid ring vacuum pump with a supersonic gas ejector 03002

Róbert Olšiak, Zoltán Fuszko and Zoltán Csuka

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816803002

Application of Latest Developments in the Field of Fluid Mechanics and Energy in Technical Practice

Open Access

Numerical simulation of heat exchanger operation 04001

Peter Durcansky and Pavol Orsansky

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816804001

Open Access

Analysis of thermodynamic parameters and their influence on the thermal comfort in the working environment 04002

Zuzana Kolková, Peter Hrabovský, Jozef Matušov and Radovan Nosek

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816804002

Open Access

Conceptual design of the mobile granulation line for production fertilizers from digestates and ash mixtures 04003

Marek Wróbel, Marcin Jewiarz, Krzysztof Mudryk, Jarosław Frączek and Krzysztof Dziedzic

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816804003

Open Access

Digestate, ash and Trichoderm based fertilizer – production line concept design 04004

Marcin Jewiarz, Marek Wróbel, Jarosław Frączek, Krzysztof Mudryk and Krzysztof Dziedzic

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816804004

Visualization of Flow

Open Access

Dynamics of flow in a branch of a branching channel 05001

Václav Uruba, Pavel Procházka and Vladislav Skála

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816805001

Open Access

Stereoscopic TR PIV measurement and POD analysis of flow behind the turbine prototype of model size 05002

Darina Jasikova, Michal Kotek and Vaclav Kopecky

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816805002

Open Access

Evolution of vortical structures behind an inclined flat plate 05003

Pavel Procházka, Václav Uruba and Vladislav Skála

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816805003

Open Access

The PIV study of air flow past the counter-swirler 53983 05004

Daniel Duda

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816805004

Measurement of Energy Systems and Systems

Open Access

Efficiency calculation on 10 MW experimental steam turbine 06001

Michal Hoznedl

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816806001

Open Access

Measurement of operating parameters of a hydrogen compressor using metal hydride materials 06002

Tomáš Brestovič, Natália Jasminská, Marián Lázár and Romana Dobáková

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816806002

Open Access

Evaluation of the energy production efficiency of CHP systems during the summer and winter season operation on the cogeneration unit 06003

Miroslav Rimár, Milan Abraham, Marcel Fedak, Jakub Váhovský and Andrii Kulikov

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816806003

Open Access

The Effect of Moisture Content of Black Locust Wood on the Heating in the Saturated Water Steam during the Process of Colour Modification 06004

Ladislav Dzurenda

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816806004

Open Access

Control and regulation systems of energy networks in buildings 06005

Zuzana Kolková, Peter Hrabovský, Jozef Matušov, Martina Antošová and Michal Holubčík

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816806005

Open Access

Measurement and Calculation of Explosion Pressure for Hydroxyl Substituted Hydrocarbons Mixture 06006

Jan Skřínský

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816806006

Open Access

Introductory measurements on the physical model of the VVER 440 nuclear reactor II. fuel cell assembly 06007

Zdenko Závodný, Peter Mlynár, František Urban, Ján Hollý, Zoltán Fuszko and František Világi

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816806007

Open Access

Research of material and power of photovoltaic panels of various types of degradation in operating conditions 06008

Peter Tauš, Jana Tomčejová, Marcela Taušová, Ľubomíra Gabániová, Dušan Kudelas, Matúš Jeňo and Daniel Šlosár

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816806008

Special Experimental Methods in Fluid Mechanics and Energy

Open Access

Boiling heat transfer augmentation on surfaces covered with phosphor bronze meshes 07001

Lidia Dąbek, Andrej Kapjor and Łukasz J. Orman

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807001

Open Access

Modeling the Production of Natural Gas Hydrates in Laboratory Conditions 07002

Ján Siažik, Milan Malcho and Stanislav Gavlas

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807002

Open Access

Extrusion in Hydroenvironment in Laboratory Conditions 07003

Ján Moravec

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807003

Open Access

Methods of filling the heat pipes 07004

Roman Banovčan, Marcel Novomestský, Martin Vantúch, Andrej Kapjor and Patrik Nemec

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807004

Open Access

Application of mathematical modelling when determining the parameters effect of biomass densification process on solid biofuels quality 07005

Peter Križan, Michal Svátek, Miloš Matúš and Juraj Beniak

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807005

Open Access

High-temperature reaction of sodium vapour with quartz glass 07006

Radovan Nosek, Zuzana Kolkova, Libor Trško, Tatiana Liptáková, Jan Procházka, Ondřej Libera and Petra Bublíková

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807006

Open Access

One dimensional modelling of flow in a helium loop 07007

František Világi, Branislav Knížat, Marek Mlkvik, František Urban, Róbert Olšiak and Peter Mlynár

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807007

Open Access

Experimental investigation of the boundary layer transition on the prismatic blade using infrared thermography 07008

Erik Flídr and Tomáš Jelínek

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807008

Open Access

Importance of the experimental investigation of a concasting technology 07009

Josef Štětina, František Kavička, Jaroslav Katolický, Tomáš Mauder and Lubomír Klimeš

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807009

Open Access

Liquefied extinguishing agent discharge to an overpressure-sensitive enclosed volume 07010

Lukáš Hurda and Richard Matas

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807010

Open Access

Influence of temperature on the production and size distribution of fine particles released from beech wood samples 07011

Ján Poláčik, Jiří Pospíšil, Ladislav Šnajdárek and Tomáš Sitek

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807011

Open Access

Volume ratio of two immiscible phases measured by electrical impedance tomography 07012

Michal Malík, Jiří Primas, Michal Kotek, Václav Kopecký, Bohuš Kysela and Radek Šulc

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807012

Open Access

Explosion Characteristics of Hydrogen for CFD Modelling and Simulation of Turbulent Gas Flow 07013

Jan Skřínský, Jan Koloničný and Tadeáš Ochodek

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807013

Open Access

Experimental Modelling of Autoignition Temperature for Alkyl/Alkenyl Products from Fischer-Tropsch Synthesis 07014

Jan Skřínský, Ján Vereš and Karel Borovec

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807014

Open Access

Designing the solar collector position with the Arduino electronic platform 07015

Peter Vician, Peter Ďurčanský and Jozef Jandačka

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807015

Open Access

Impact of oxygen enhanced combustion of natural gas on thermal efficiency of combustion aggregate 07016

Róbert Dzurňák, Gustáv Jablonský, Augustín Varga, Ján Kizek, Marcel Pástor and Ladislav Lukáč

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816807016

Renewable Energy

Open Access

Comparison of particulate matter in combustion of wood chips and sawdust at nominal and reduced output 08001

Alexander Čaja and Nikola Kantová

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816808001

Open Access

Alternative solid fuels combustion in small heat source 08002

Michal Holubčík, Nikola Kantová, Jozef Jandačka and Zuzana Kolková

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816808002

Open Access

Characterization of syngas produced from biomass gasification 08003

Jan Najser, Ondřej Němček and Marcel Mikeska

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816808003

Open Access

Substrates for slow pyrolysis 08004

Václav Peer, Jaroslav Frantík, Jan Kielar and Drahomír Mašek

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816808004

Open Access

Economy of heat recovery from mining water in Ostrava region conditions 08005

Petra Petričko, David Kupka, Jan Koloničný and Aleš Richter

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816808005

Open Access

Transformation of Waste Heat into Electricity 08006

Aleš Richter, Jan Koloničný and Jan Janša

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816808006

Current Problems in the Energy

Open Access

Impact of the production of wood pellets on their properties 09001

Matej Palacka, Michal Holubčík and Jozef Jandačka

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816809001

Open Access

Solutions for the size & concentration measurement of aerosols from combustion 09002

Lucia Bustin, Florian Dahlkötter, Carsten Kykal, Torsten Tritscher and Oliver F. Bischof

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816809002

Open Access

Ways to heat hot water via the heat pipes 09003

Peter Hrabovský, Zuzana Kolková, Jozef Matušov and Patrik Nemec

Published online: 23 May 2018

DOI: https://doi.org/10.1051/matecconf/201816809003