| Issue |
MATEC Web Conf.
Volume 168, 2018
XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 (AEaNMiFMaE-2018)
|
|
|---|---|---|
| Article Number | 02003 | |
| Number of page(s) | 7 | |
| Section | Modelling and Simulation in Fluid Mechanics and Energy | |
| DOI | https://doi.org/10.1051/matecconf/201816802003 | |
| Published online | 23 May 2018 | |
Analysis and Simulation of Forced Ventilation in Special Condition
Technical university of Kosice, Faculty of Manufacturing Technologies with a seat in Prešov, Bayerova 1, 080 01 Prešov, Slovak Republic
* Corresponding author: andrii.kulikov@tuke.sk
The research subject of the current work is heating of the closed area by the forced air ventilation system with heat recovery ventilator and floor radiators. The simulation model was made in ANSYS Fluent 14.0. In the simulation were taken to account the secondary thermal gains from the computers, monitors and humans. The results of the simulation approved that in the modern thermal passive houses heat balance calculations should observe secondary thermal gains from the installed equipment. Also were investigated the air circulation in the closed area and the influence of the different barriers which were installed in the laboratory.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.