| Issue |
MATEC Web Conf.
Volume 168, 2018
XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 (AEaNMiFMaE-2018)
|
|
|---|---|---|
| Article Number | 06002 | |
| Number of page(s) | 6 | |
| Section | Measurement of Energy Systems and Systems | |
| DOI | https://doi.org/10.1051/matecconf/201816806002 | |
| Published online | 23 May 2018 | |
Measurement of operating parameters of a hydrogen compressor using metal hydride materials
Faculty of Mechanical Engineering, TU Košice, Department of Power Engineering, Vysokoškolská 4, 042 00 Košice, the Slovak Republic
* Corresponding author: tomas.brestovic@tuke.sk
The present article deals with the possibilities of using metal hydride materials in the construction of hydrogen compressors. For the purpose of continuous operation, a tandem tank connection is used. By increasing the tank temperature, hydrogen pressure increases as well, whereas the heat is transported between the tanks by means of a heat pump. Operating parameters are measured for the purpose analysing prevention of the device failures that occur when the maximum pressure behind the heat pump compressor is exceeded.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.