MATEC Web Conf.
Volume 168, 2018XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 (AEaNMiFMaE-2018)
|Number of page(s)||6|
|Published online||23 May 2018|
Characterization of syngas produced from biomass gasification
ENET Centre, VŠB -Technical University of Ostrava, 17. listopadu 15, Ostrava-Poruba CZ-708 33, Czech Republic
* Corresponding author: firstname.lastname@example.org
This conference paper presents biomass (wood chips from the production process of sawmills) as a renewable energy source to produce electric energy by gasification. Executed measurements from the gasifier with a fixed bed and properties of produced syngas are described in this paper. The goal is to use the produced syngas at co-generation units with piston combustion engines to produce electric energy and heat. The syngas composition is the final result of these measurements. The syngas from gasification contains pollutants which cause technical difficulties during its use in engines with internal combustion and for this reason it is necessary to choose an adequate system of syngas cleaning.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.