MATEC Web Conf.
Volume 254, 2019XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|Number of page(s)||10|
|Section||Advanced Industrial, Automotive and Green Energy Applications|
|Published online||15 January 2019|
Dependence of the Cross Section of the Cut Layer on the Specific Cutting Resistance
Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, 17. listopadu 15/2172, Ostrava, Czech Republic
* Corresponding author: firstname.lastname@example.org
This article deals with the study of the effect of cross section of the cut layer of material and its influence on the specific cutting resistance. Measurement and evaluation were carried out using two machined materials, according to the designation W.Nr. carbon steel 1.1191, which is a reference material for the steel grade and refractory nickel alloy 2.4856. For the purpose of the experiment, longitudinal turning technology with two interchangeable CNMG 120408 SM and CNMX 1204A2 – SM cutting inserts was chosen. According to the recommended index insert values, two different types of cutting conditions were chosen for each material so that the cross section of the chip remained the same during machining. For each material, the cutting speed was constant and the feed rate and cutting depth were changed. The main goal of the experimental work was comparison of the specific cutting resistance in dependence on different cross section of the removed layer of material. On the basis of measuring of cutting forces by dynamometer Kistler the resulting cutting force was determined and the size of the specific cutting resistance was calculated.
Key words: nickel alloy / machining / cutting tool / cutting force / cutting resistance
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.