A review on model updating of joint structure for dynamic analysis purpose

¹ Advanced Structural Integrity and Vibration Research (ASIVR), Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia
² Department of Engineering Mechanics, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia 86400 Parit Raja, Batu Pahat, Johor, Malaysia

^a Corresponding author: mshahrir@ump.edu.my

Abstract

Structural joints provide connection between structural element (beam, plate etc.) in order to construct a whole assembled structure. There are many types of structural joints such as bolted joint, riveted joints and welded joints. The joints structures significantly contribute to structural stiffness and dynamic behaviour of structures hence the main objectives of this paper are to review on method of model updating on joints structure and to discuss the guidelines to perform model updating for dynamic analysis purpose. This review paper firstly will outline some of the existing finite element modelling works of joints structure. Experimental modal analysis is the next step to obtain modal parameters (natural frequency & mode shape) to validate and improve the discrepancy between results obtained from experimental and the simulation counterparts. Hence model updating will be carried out to minimize the differences between the two results. There are two methods of model updating; direct method and iterative method. Sensitivity analysis employed using SOL200 in NASTRAN by selecting the suitable updating parameters to avoid ill-conditioning problem. It is best to consider both geometrical and material properties in the updating procedure rather than choosing only a number of geometrical properties alone. Iterative method was chosen as the best model updating procedure because the physical meaning of updated parameters are guaranteed although this method required computational effort compare to direct method.