| Issue |
MATEC Web Conf.
Volume 350, 2021
Research, Design & Cad in Con-struction: Theory and Practice (RDCAD 2021)
|
|
|---|---|---|
| Article Number | 00018 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/matecconf/202135000018 | |
| Published online | 02 December 2021 | |
Investigation of causes of XCMG QY25К lorry-mounted crane accident
Brest State Technical University, Moskovskaya str. 267, 224017, Brest, Belarus
* Corresponding author: vai_mrtm@bstu.by
The article conducted a study of the causes of the accident of the XCMG QY25K lorry-mounted crane. Visual inspection of the emergency boom (boom in a critical condition) was carried out with the analysis of the state of the material in the broken section. The microstructure of steel in the crack zone was investigated. Chemical analysis of steel with a determination of the mass fraction of chemical elements was performed. Studies of the strength and hardness of material samples were carried out. Theoretically, the maximum tensile and compressive stresses in the section of the failed boom are determined. Comprehensive analysis of the obtained theoretical and experimental research results made it possible to establish the true cause of the accident of the lorry-mounted crane.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.