Issue |
MATEC Web Conf.
Volume 350, 2021
Research, Design & Cad in Con-struction: Theory and Practice (RDCAD 2021)
|
|
---|---|---|
Article Number | 00019 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/matecconf/202135000019 | |
Published online | 02 December 2021 |
Strengthening of tensile zone of the reinforced concrete beams with composite fabrics
Yanka Kupala State University of Grodno, 230023 Grodno, 22 Ozheshko str., Belarus
* Corresponding author: a.volick@grsu.by
e-mail: novickij_yy@grsu.by
A fabric, tapes, that are glued to the outer tensile surface, which are considered as the external composite reinforcement with tensile steel reinforcement, are currently used to strengthen reinforced concrete beams. The results of the experimental studies presented in this article have shown the possibilities of effective application of technical polyamide (nylon) fabric produced by «Khimvolokno Plant» JSC «Grodno Azot», and glass fabrics, produced by JSC «Polotsk-Steklovolokno» for strengthening the reinforced concrete beams. Experimental studies have shown that the external reinforcing of the tensile zone with technical polyamide (nylon) fabric and fiberglass changes the beam failure mode, increases the bearing capacity of reinforced concrete beams in comparison with beams without strengthening by 16% – 38%, depending on the material and the method of strengthening.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.