| Issue |
MATEC Web Conf.
Volume 112, 2017
21st Innovative Manufacturing Engineering & Energy International Conference – IManE&E 2017
|
|
|---|---|---|
| Article Number | 01005 | |
| Number of page(s) | 7 | |
| Section | Advanced Machining and Surface Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201711201005 | |
| Published online | 03 July 2017 | |
Requirements in designing a device for experimental investigation of threading accuracy
1 “Gheorghe Asachi” Technical University of Iași, Department of Machine Manufacturing Technology, Blvd. D. Mangeron, 59A, Iași, Romania
2 University of Niš, Department of Production Engineering, Aleksandra Medvedeva 14, 18000 Niš, Serbia
3 “Ștefan cel Mare” University of Suceava, Department of Mechanics and Technology, Universității Street, 13, Suceava, Romania
* Corresponding author: mcoteata@tcm.tuiasi.ro
When the threads are obtained by using turning tools, various factors are able to affect the machining accuracy. In order to reveal the way in which these factors exert influence on the threading accuracy, an analysis of some proper situations of obtaining threads on universal lathes and using turning tools was developed. The analysis showed that the thread profile error could be essentially affected by the position of the cutting tool active edges relative to the workpiece. Taking into consideration the results of analysis, some aspects concerning the requirements to be met during the design of a device that could be used in experimental investigation of influence exerted by some factors on the threading accuracy are presented.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.