EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 357 (2022) MATEC Web Conf., 357 (2022) 08001 References
Open Access
Issue
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
Article Number 08001
Number of page(s) 9
Section Theoretical and Applied Mathematics in Engineering
DOI https://doi.org/10.1051/matecconf/202235708001
Published online 22 June 2022
  1. B. Axmann, F. Elbing Strahlerfahren, Zeitschrift fur wirtschaftlichen Fabrikbetrieb. ZWF, 92, 3, 16–77 (1997). [Google Scholar]
  2. L. Chen, X. Zhang A review study of solid-gas sublimation flow refrigeration: Form basic mechanism to applications. International Journal of Refrigeration, 40, 61–83 (2014). [CrossRef] [Google Scholar]
  3. S. Dong, B. Song, B. Hansz, et al. Modeling of dry ice blasting and its application in thermal spray. Material Research Innovations, 16, 61–66 (2012). [CrossRef] [Google Scholar]
  4. A. Dzido, P. Krawczyk, M. Kurkus-Gruszecka Numerical Analysis of Dry Ice Blasting Convergent-Divergent Supersonic Nozzle. Energies, 12, 4787 (2019). [CrossRef] [Google Scholar]
  5. A. Fierek, I. Malujda, K. Talaska Design of a mechatronic unit for application of coats of adhesive. MATEC Web of Conferences, 254, 01019-1–01019-11 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  6. A. Fierek, I. Malujda, D. Wilczyñski, K. Walesa Analysis of shaft selection in terms of stiffness and mass. IOP Conference Series: Materials Science and Engineering, 776, 012028-1–012028-9 (2020). [Google Scholar]
  7. A. Fierek, I. Malujda, D. Wilczyñski, K. Walesa, Preliminary research of strength of glued connections of plastic elements. IOP Conference Series: Materials Science and Engineering, 776, 012027-1–012027-11 (2020). [Google Scholar]
  8. J. Górecki, I. Malujda, K. Talaska, et al. Static compression tests of concentrated crystallized carbon dioxide. Applied Mechanics and Materials, 816, 490–495 (2015). [CrossRef] [Google Scholar]
  9. J. Górecki, I. Malujda, K. Talaska, et al. Investigation of internal friction of agglomerated dry ice. Procedia Engineering, 136, 275–279 (2016). [CrossRef] [Google Scholar]
  10. J. Górecki, I. Malujda, K. Talaska Influence of the Value of Limit densification Stress on the Quality of Pellets During the Agglomeration Process of CO2. Procedia Engineering, 136, 269–274 (2016). [CrossRef] [Google Scholar]
  11. J. Górecki, I. Malujda, K. Talaska, et al. Dry ice compaction in piston extrusion process. Actamechanica et automatic, 11, 4, 313–316 (2017). [CrossRef] [Google Scholar]
  12. J. Górecki, I. Malujda, K. Talaska, M. Kukla, P. Tarkowski Influence of the compression length on the ultimate stress in the process of mechanical agglomeration of dry ice. Procedia Engineering, 177, 363–368 (2017). [CrossRef] [Google Scholar]
  13. J. Górecki, I. Malujda, K. Talaska, et al. Influence of geometrical parameters of convergent sleeve on the value of limit stress. MATEC Web of Conferences, 157, 05006, 050061–0500610 (2018). [Google Scholar]
  14. J. Górecki, K. Talaska, K. Walesa, D. Wilczyñski Analysis of the Effectiveness of Dry Ice Agglomeration in Crank Piston Pelletizeri. Machine Dynamics Research, 4, 4, 3341 (2018). [Google Scholar]
  15. J. Górecki, I. Malujda, D. Wilczyñski The influence of geometrical parameters of the forming channel on the boundary value of the axial force in the agglomeration process of dry ice. Matec Web of Conferences, 254, 05001 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  16. J. Górecki, I. Malujda, D. Wilczyñski, D. Wojtkowiak Influence of the face surface shape of the piston on the limit value of compaction stress in the process of dry ice agglomeration. Matec Web of Conferences, 254, 06001 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  17. J. Górecki Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters. IOP Conference Series: Materials Science and Engineering, 776, 012030-1–012030-7 (2020). [Google Scholar]
  18. J. Górecki, A. Fierek, K. Talaska, K. Walesa The influence of the limit stress value on the sublimation rate during the dry ice densification process. IOP Conference Series: Materials Science and Engineering, 776, 012072-1–012072-7 (2020). [Google Scholar]
  19. J. Górecki, K. Talaska, K. Walesa, D. Wilczyñski, D. Wojtkowiak Mathematical Model Describing the Influence of Geometrical Parameters of Multichannel Dies on the Limit Force of Dry Ice Extrusion Process. Materials, 13, 15, (2020) doi: https://doi.org/10.3390/ma13153317. [Google Scholar]
  20. M. Kujawski, P. Krawiec Analysis of Generation Capabilities of Noncircular Cog belt Pulleys on the Example of a Gear with an Elliptical Pitch Line. Journal of Manufacturing Science and Engineering-Transactions of the ASME, 133, 5 (2011). [CrossRef] [Google Scholar]
  21. M. Li, W. Liu, X. Qing, et al. Feasibility study of a new approach to removal of paint coatings in remanufacturing. Journal of Materials Processing Technology, 234, 102–112 (2016). [CrossRef] [Google Scholar]
  22. Y. Liu, G. Calvert, C. Hare, et al. Size measurement of dry ice particles produced form liquid carbon dioxide. Journal of Aerosol Science, 48, 1–9 (2012). [CrossRef] [Google Scholar]
  23. Y. Liu, D. Hirama, S. Matusaka Particle removal process during application of impinging dry ice jet. Powder Technology, 2017, 607–613 (2012). [CrossRef] [Google Scholar]
  24. Y. Liu, H. Maruyama, S. Matsusaka Agglomeration process of dry ice particles produced by expanding liquid carbon dioxide. Advanced Powder Technology, 21, 652657 (2010). [Google Scholar]
  25. I. Malujda Modeling of limit stress fields and temperature in plasticizing and compaction processes oriented to the needs of machine design. Poznan University of Technology (2012). [Google Scholar]
  26. I. Malujda, D. Wilczyñski Mechanical properties investigation of natural polymers. Procedia Engineering, 136, 263–268 (2016). https://doi.org/10.1016/j.proeng.2016.01.208. [CrossRef] [Google Scholar]
  27. L. Magdziak, I. Malujda D. Wilczyñski D. Wojtkowiak Concept of improving positioning of pneumatic drive as drive of manipulator. Procedia Engineering, 177, 331–338 (2017). https://doi.org/10.1016/j.proeng.2017.02.234. [CrossRef] [Google Scholar]
  28. V. Masa, P. Kuba Efficient use of compressed air for dry ice blasting. Journal of Cleaner Production, 111, 76–84 (2016). [CrossRef] [Google Scholar]
  29. A. Mazzoldi, T. Hill, J. Colls CO2 transportation for carbon capture and storage: Sublimation of carbon dioxide from a dry ice bank. International Journal of Greenhouse Gas Control, 2, 210–218 (2008). [CrossRef] [Google Scholar]
  30. A. Mikolajczak, P. Krawczyk, M. Stepieñ M., et al. Preliminary specification of the dry ice blasting converging-divergent nozzle parameters basing on the standard (analytical) methods. Rynek Energii, 4, 91–96 (2018). [Google Scholar]
  31. I. Minoru, D. Kazuki, N. Kyosuke, M. Yuta, Y. Yotsumi, C. Toshimasa Increase of Snow Compaction Density by Repeated Artificial Snow Consolidation Formation. Journal of the Institute of Industral Applications Engineers, 8, 3, 103–111 (2020) [Google Scholar]
  32. C. Otto, S. Zahn, F. Rost, et al. Physical Methods of cleaning And Disinfection of Surfaces. Food Engineering Review, 3, 171–188 (2011). [CrossRef] [Google Scholar]
  33. P. Perz, I. Malujda, D. Wilczyñski, P. Tarkowski Methods of controlling a hybrid positioning system using LabVIEW. Procedia Engineering, 339–346, 177 (2017). [CrossRef] [Google Scholar]
  34. A. Purohit, R. Singh, A. Mohan Role of particulate cabon dioxide on removal of Salmonella and Listeria attached to stainless steel sirfaces. LWT, 122, 108979 (2020). [CrossRef] [Google Scholar]
  35. K. Talaska, I. Malujda, D. Wilczyñski Agglomeration of natural fibrous materials in perpetual screw technique - a challenge for designer. Procedia Engineering, 136, 63–69 (2016). [CrossRef] [Google Scholar]
  36. K. Walesa, I. Malujda, D. Wilczyñski Shaping the parameters of cylindrical belt surface in the joint area. Acta Mechanica et Automatica, 13(4), 255–261 (2019). [CrossRef] [Google Scholar]
  37. K. Walesa, I. Malujda, D. Wilczyñski Experimental research of the thermoplastic belt plasticizing process in the hot plate welding. IOP Conferences: Materials Science and Engineering, 776, 1, 012011 (2020). [CrossRef] [Google Scholar]
  38. K. Walesa, I. Malujda, J. Górecki Experimental research of the mechanical properties of the round drive belts made of thermoplastic elastomer. IOP Conferences: Materials Science and Engineering, 776, 1, 012107 (2020). [CrossRef] [Google Scholar]
  39. L. Wargula, M. Kukla, P. Krawiec, B. Wieczorek Impact of Number of Operators and Distance to Branch Piles on Woodchipper Operation. Forests, 11, 598 (2020). [CrossRef] [Google Scholar]
  40. A. Witte, M. Bobal, R. David et al. Investigation of the potential of dry ice blasting for cleaning and disinfection in the food production environment. LWT - Food Science and Technology, 75, 735–741 (2017). [CrossRef] [Google Scholar]
  41. J. Winczek, E. Gawroñska Analytical description of thermal and structural strains in multipass GMAW surfacing and rebuilding. METAL 2015 - 24th International Conference on Metallurgy and Materials, Conference Proceedings, 910–914, (2015). [Google Scholar]
  42. J. Winczek, E. Gawroñska Numerical study of thermal and structural strains in multipassgmaw surfacing and rebuilding. METAL 2015 - 24th International Conference on Metallurgy and Materials, Conference Proceedings, 655–660 (2015). [Google Scholar]
  43. J. Winczek, E. Gawroñska, M. Gucwa, N. Szczygiol Theoretical and Experimental Investigation of Temperature and Phase Transformation during SAW Overlaying. Applied Sciences, 9, 7, (2019). [Google Scholar]
  44. D. Wojtkowiak, K. Talaska Determination of the effective geometrical features of the piercing punch for polymer composite belts. International Journal of Advanced Manufacturing Technology, 104, 1-4, 315–332 (2019). [CrossRef] [Google Scholar]
  45. D. Wojtkowiak, K. Talaska The influence of the piercing punch profile on the stress distribution on its cutting edge. MATEC Web of Conferences, 254, 02001 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  46. D. Wojtkowiak, K. Talaska Determination of the effective geometrical features of the piercing punch for polymer composite belts. International Journal of Advanced Manufacturing Technology, 104, 1-4, 315–332 (2019). [CrossRef] [Google Scholar]
  47. D. Wojtkowiak, K. Talaska Modelling the Belt Perforation Process with the Piercing Punch and the Die in Context of the Construction of the Punching Dies. IOP Conferences: Materials Science and Engineering, 647, 012013 (2019). [CrossRef] [Google Scholar]
  48. D. Wojtkowiak, K. Talaska, D. Wilczyñski, J. Górecki, K. Walesa Determining the Power Consumption of the Automatic Device for Belt Perforation Based on the Dynamic Model. Energies, 14, 1, 317-1–317-15 (2021) [CrossRef] [Google Scholar]
  49. H. Yamaguchi, X. Niu, K. Sekimoto, P. Neksa Investigation of dry ice blockage in an ultra-low temperature cascade refrigeration system using CO2 as a working fluid. International Journal of Refrigeration, 34, 466–475 (2011). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.