EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 357 (2022) MATEC Web Conf., 357 (2022) 07006 References
Open Access
Issue
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
Article Number 07006
Number of page(s) 10
Section Physical and Chemical Properties of Materials
DOI https://doi.org/10.1051/matecconf/202235707006
Published online 22 June 2022
  1. T. Rydzkowski, G. Radomski Mixing ratios obtained using screw-disk-type and screw extruders; selected properties of regranulate and the original material mixtures. Plastic, Rubber and Composites: Macromolecular Engineering. November 2008, 7, 8, 376–380 (2008). [CrossRef] [Google Scholar]
  2. P. Krawiec, L. Rózañski, D. Czarnecka-Komorowska, L. Wargula Evaluation of the Thermal Stability and Surface Characteristics of Thermoplastic Polyurethane V-Belt. Materials 13, 1502 (2020). [CrossRef] [Google Scholar]
  3. T. Klepka, T. Garbacz, E. Bociajga E. Some properties of extruded porous microducts. PrzemyslChemiczny, 93, 6, 907–910 (2014). [Google Scholar]
  4. D. Czarnecka-Komorowska, T. Sterzynski Effect of polyhedral oligomeric silsesquioxane on the melting, structure, and mechanical behavior of polyoxymethylene, Polymers, 10, 2, 203 (2018). [CrossRef] [Google Scholar]
  5. D. Czarnecka-Komorowska, T. Sterzynski, H. Maciejewski, M. Dutkiewicz The effect of polyhedral oligomeric silsesquioxane (POSS) on morphology and mechanical properties of polyoxymethylene (POM). Composites Theory and Practice, 12, 4, 232236 (2012). [Google Scholar]
  6. T. Klepka Construction of axial-symmetric polymeric extrudates of complex forms. Polimery, 53, 5, 390–395 (2008). [CrossRef] [Google Scholar]
  7. T. Rydzkowski Stopieñ uplastycznienia wytloczyny uzyskiwanej w warunkach autotermicznej pracy wytlaczarki slimakowo-tarczowej. Polimery, LIV, 5, 377–381 (2009). [Google Scholar]
  8. J. Flizikowski, A. Al-Zubiedy, M. Macko Multiple disc unit as speed coagulation mixer for soiling of water. REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology, pp. 2895–2896 (2005). [Google Scholar]
  9. M. Macko, Z. Szczepañski, D. Mikolajewski Design and manufacture of artificial organs made of polymers. 23rd Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS) 2018. Book Series: MATEC Web of Conferences, 254 (2019). [Google Scholar]
  10. E. Mikolajewska, M. Macko, Z. Szczepañski, D. Mikolajewski Reverse Engineering in Rehabilitation. Encyclopedia of Information Science and Technology, Fourth EditionEdition: 4th Chapter: Section: Biomedical Engineering, Chapter 45, pp. 521–528, (2018). [CrossRef] [Google Scholar]
  11. M. Macko, Z. Szczepañski, D. Mikolajewski, E. Mikolajewska, S. Listopadzki The Method of Artificial Organs Fabrication Based on Reverse Engineering in Medicine. In: Rusiñski, E., Pietrusiak, D. (Eds) Proceedings of the 13th International Scientific Conference. RESRB 2016. Lecture Notes in Mechanical Engineering. Springer, Cham. (2017). [Google Scholar]
  12. I. Rojek, D. Mikolajewski, E. Dostatni, M. Macko AI-optimized technological aspects of the material used in 3D printing processes for selected medical applications. Materials, 2020, 13, 23, 1–19, 5437 (2020). [Google Scholar]
  13. M. Macko, Z. Szczepañski, D. Mikolajewski, E. Mikolajewska, J. Furtak CAE/FDM methods for design and manufacture artificial organs for exercises purposes. Lecture Notes in Mechanical Engineering, pp. 462–469 (2019). [CrossRef] [Google Scholar]
  14. M. Macko, Z. Szczepañski, E. Mikolajewska, J. Nowak, D. Mikolajewski Repository of 3D images for education and everyday clinical practice purposes. Bio-Algorithms and Med-Systems, 13, 2, 111–116 (2017). [CrossRef] [Google Scholar]
  15. J. Kopowski, I. Rojek, D. Mikolajewski, M. Macko 3D printed hand exoskeleton - own concept. Lecture Notes in Mechanical Engineering, pp. 298–306 (2019). [CrossRef] [Google Scholar]
  16. J. Kopowski, D. Mikolajewski, M. Macko, I. Rojek I. Bydgostian hand exoskeleton -own concept and the biomedical factors. Bio-Algorithms and Med-Systems. doi: 10.1515/BAMS-2019-0003 (2019). [Google Scholar]
  17. A. Tomporowski, J. Flizikowski, W. Kruszelnicka A new concept of roller-plate mills. Przemysl Chemiczny. 96, 1750–1755 (2017). [Google Scholar]
  18. W. Kruszelnicka, A. Idzikowski, K. Markowska, R. Kasner, R.:Quality Index of Multi-Disc Grinding Process of Grainy Biomass. QPI 2019. 1, 503–511 (2019). [Google Scholar]
  19. M. Macko, K. Tyszczuk, G. Smigielski, A. Mrozinski Utility of an unitary-shredding method to evaluate the conditions and selection of constructional features during grinding. MATEC Web of Conferences, 157, art. no 05016 (2018). [Google Scholar]
  20. J. Flizikowski, M. Macko Competitive design of shredder for plastic in recycling. Ed. By Horvath, I.; Xirouchakis, P. Conference: 5th International Symposium on Tools and Methods of Competitive Engineering Location. Tools and methods of competitive engineering, 1-2, 1147–1148 (2004). [Google Scholar]
  21. J. Flizikowski, M. Macko The influence of design of shredder on quality of product 2005 REWAS'04 - Global Symposium on Recycling, Waste Treatment and Clean Technology, pp. 2841–2842 (2005).. [Google Scholar]
  22. J. Flizikowski, M. Macko, J. Czerniak, A. Mrozinski 2012 Implementation of genetic algorithms into development of mechatronic multi-edge's grinder design Proc. of ASME International Mechanical Engineering Congress and Exposition (IMECE) Denver, 7, 1227–1235 (2012). [Google Scholar]
  23. M. Macko, A. Mrozinski, J. Flizikowski Design and utility of specialist comminution set-up for plastics and organic materials. 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 3, 397–402 (2011). [Google Scholar]
  24. M. Macko, A. Mrozinski, A. Prentki Simulations CAE of wood pellet machine. MATEC Web of Conferences, 254, 02028 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  25. M. Macko, K. Tyszczuk, G. Smigielski, J. Flizikowski, A. Mrozinski The use of CAD applications in the design of shredders for polymers. MATEC Web of Conferences, 157, 02027 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  26. M. Macko, A. Mrozinski Work parameters research of wood pellet machine. AIP. Conference Proceedings, 2077 (2019). [Google Scholar]
  27. M. Macko, A. Mrozinski Computer Aided Design of Wood Pellet Machines. In: Rusinski, E., Pietrusiak, D. (eds) Proceedings of the 14th International Scientific Conference: Computer Aided Engineering. CAE 2018, pp. 454–446. Lecture Notes in Mechanical Engineering. Springer, Cham (2019). [Google Scholar]
  28. J. Flizikowski, W. Kruszelnicka, M. Macko The Development of Efficient Contaminated Polymer Materials Shredding in Recycling Processes. Polymers, 13, 713 (2021). [CrossRef] [Google Scholar]
  29. L. Wargula, M. Kukla, P. Krawiec, B. Wieczorek Impact of Number of Operators and Distance to Branch Piles on Woodchipper Operation. Forests 11, 598 (2020). [CrossRef] [Google Scholar]
  30. L. Wargula, P. Krawiec, K.J. Walus, M. Kukla Fuel Consumption Test Results for a Self-Adaptive, Maintenance-Free Wood Chipper Drive Control System. Appl. Sci., 10, 2727 (2020). [CrossRef] [Google Scholar]
  31. P. Krawiec, G. Domek, L. Wargula, K. Walus, J. Adamiec The application of the optical system ATOS II for rapid prototyping methods of non-classical models of cogbelt pulleys. MATEC Web of Conferences, 157, 01010 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  32. G. Smigielski, K. Tyszczuk, A. Mrozinski Analysis of the size of shredded particles in a multi-disc grinder, IOP Conference Series: Materials Science and Engineering, Vol. 776 (2020). [Google Scholar]
  33. H. Merkus Particle size measurements Springer Netherlands (2009). [Google Scholar]
  34. R. Wójtowicz, W. Szatko Solid particle optical analysis methodology Technical Transactions Mechanics, 109 (2012). [Google Scholar]
  35. http://nanoczastki.pl/analizator-czastek-2/ accessed 25.07.2020. [Google Scholar]
  36. A. Baliñski Basic issues related to the measurement of size and Particle size distribution Transactions of Foundry Research Institute, LIII (2013). [Google Scholar]
  37. https://www.retsch.pl/pl/produkty/przesiewacze-laboratoryjne/przesiewacze-laboratoryjne/ - accessed 25.07.2020. [Google Scholar]
  38. https://apinstruments.pl/oferta/wielkosc-i-lub-ksztalt-czastek/ - accessed 26.07.2020. [Google Scholar]
  39. https://www.anton-paar.com/pl-pl/produkty/grupa/analizatory-wielkosci-czastki/ - accessed 26.07.2020. [Google Scholar]
  40. https://www.ekohigiena.com.pl/analiza-wielkoci-czstek-metoda-dyfrakcji-laserowej -accessed 26.07.2020. [Google Scholar]
  41. https://apinstruments.pl/dyfrakcja-laserowa-porownanie-z-metoda-sitowa/ - accessed 25.07.2020. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.