MATEC Web Conf.
Volume 254, 2019XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|Number of page(s)||11|
|Section||Methods and Systems in Machine Design|
|Published online||15 January 2019|
Design of a mechatronic unit for application of coats of adhesive
Chair of Basics of Machine Design, Poznan University of Technology, Poznań, Poland
* Corresponding author: firstname.lastname@example.org
This paper presents the chosen structural design and confirms the need of a mechatronic system for application of adhesive on parts of seating systems for public transport vehicles. The design assumptions concerning the mechanical part of the machine and control system design are given. The engineering calculations for the chosen structural joints are described. The chosen driving systems are presented and the method for removing excess adhesive is proposed. The control system design is described is described towards the end of this paper. Information is given on the control block diagram which was used for selecting the system components. PLC, motor controllers and the associated sensors are specified. Conclusions are presented at the end of this paper.
Key words: gluing (adhesive bonding) / gluing machine / process automation
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.