| Issue |
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
|
|
|---|---|---|
| Article Number | 06002 | |
| Number of page(s) | 14 | |
| Section | Modelling of Structural Materials, Composities and Nanomaterials | |
| DOI | https://doi.org/10.1051/matecconf/202235706002 | |
| Published online | 22 June 2022 | |
Research of Material Properties for the Purposes of Modeling the Fabric Destruction Process
Poznań University of Technology, ul. Piotrowo 3, 60-965, Poland
The need to diversify the sources of raw materials used in industry has resulted in the increasing popularity of recycled materials. This situation is also observed in the clothing industry, which shows a growing interest in using recycled down and feathers from old jackets. Because the recovery process was being carried out manually, it is necessary to automate the process. Designing a suitable device requires testing to allow the modeling of the process to be carried out by the machine. The article presents the results of experimental tests whose purpose was to determine the material properties necessary to carry out numerical simulations of the destruction process of polyester fabrics. The article further presents the research methodology together with the research stand and discusses the results obtained.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.