Issue |
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|
|
---|---|---|
Article Number | 01008 | |
Number of page(s) | 12 | |
Section | Methods and Systems in Machine Design | |
DOI | https://doi.org/10.1051/matecconf/201925401008 | |
Published online | 15 January 2019 |
Globoid surface shaped with turning and envelope method
Czestochowa University of Technology, Institute of Mechanical Technologies, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
* Corresponding author: piotrek@itm.pcz.czest.pl
In industrial practice, cylindrical worm gears are most often used due to their feasibility. In the literature, much attention has been paid to determining the helical surface of worms of such transmissions. Globoidal worm gearboxes are much less frequently used due to technological difficulties. Come on, the globoidal worm ensures simultaneous cooperation of a larger number of teeth and the location of the teeth contact line is more favorable. Therefore, the following is an analytical method for the description of a globoid surface by turning and by a finger milling method.
Key words: globoid worm / helical surface.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.