Open Access
MATEC Web Conf.
Volume 234, 2018
BulTrans-2018 – 10th International Scientific Conference on Aeronautics, Automotive and Railway Engineering and Technologies
Article Number 05002
Number of page(s) 5
Section Railway Engineering and Technologies
Published online 21 November 2018
  1. P. Fabian, J. Gerlici, J. Masek, P. Marton, Versatile, efficient and long wagon for intermodal transport in Europe, Komunikacie, 15 (2), 118-123 (2013) [Google Scholar]
  2. J. Dižo, J. Harušinec, M. Blatnický, Computation of modal properties of two types of freight wagon bogie frames using the finite element method, Manufacturing Technology, 18 (2), 208-214 (2018) [CrossRef] [Google Scholar]
  3. I. Gritsuk, Y. Gutarevych, V. Mateichyk, V. Volkov, Improving the processes of preheating and heating after the vehicular engine start by using heating system with phase-transitional thermal accumulator, SAE Technical Paper 2016-01-0204 (2016), [Google Scholar]
  4. V. Hauser, O. Nozhenko, K. Kravchenko, M. Loulová, J. Gerlici, T. Lack, Car body and bogie connection modification for track curves passability improvement, 22nd Slovak-Polish Scientific Conference on Machine Modelling and Simulations, MMS 2017, Sklene Teplice, Slovakia, MATEC Web of Conferences, 157 (5-8 September 2017) [Google Scholar]
  5. P. Štastniak, M. Moravčík, Freight bogie prototype properties analysis by means of simulation computations, Manufacturing Technology, 17 (3), 381-388 (2017) [Google Scholar]
  6. G. Bogomaz, D. Mehov, O. Pilipchenko, Y. Chernomashentseva, Load of tank containers located on a railway platform, when striking a coupler (in Russian), Collection of scientific works “Dynamics and control of movement of mechanical systems” Kiev, 87-95 (1992) [Google Scholar]
  7. Norms for the calculation and design of railroad wagons of the Ministry of Railways of gauge 1520 mm (non-self-propelled) (in Russian), Moscow: GosNIIV, VNIIZhT, 319 (1996) [Google Scholar]
  8. GOST 33211. Freight wagons. Requirements for strength and dynamic qualities (in Russian). Moscow: Standartinform, 54 (2016) [Google Scholar]
  9. O. Fomin, O. Burlutsky, Y. Fomina, Development and application of cataloging in structural design of freight car building, Scientific and technical journal “Metallurgical and Mining Industry”, 2, 250–256 (2015) [Google Scholar]
  10. O. Fomin, A. Lovskaya, A. Plakhtiy, V. Nerubatsky, The influence of implementation of circular pipes in load-bearing structures of bodies of freight cars on their physico-mechanical properties, Scientific Bulletin of National Mining University, 6 (162), 89-96 (2017) [Google Scholar]
  11. GOST 31232. Containers for the transport of dangerous goods. Requirements for operational safety (in Russian), Belarusian State Institute for Standardization and Certification, Minsk, 6 (2005) [Google Scholar]
  12. S. Myamlin, Y. Kebal, S. Kondratyuk, Perspective constructions of tank-containers for transportation of light oil products, ammonia and hydrocarbon gases (in Russian), Journal “Rail transport Ukraine”, 2, 44-46 (2012) [Google Scholar]
  13. E. Lisowski, W. Czyzycki, Transport and storage of lng in container tanks, Journal of KONES Powertrain and Transport, 18 (3), 193-201 (2011) [Google Scholar]
  14. E. Lisowski, W. Czyżycki, K. Łazarczyk, Wdrożenie produkcji cystern kontenerowych do transportu i przechowywania gazów skroplonych, Biuletyn Instytutu Spawalnictwa w Gliwicach, 56 (2), 25-31 (2012) [Google Scholar]
  15. M. Ghiţă, C. Micu, M. Ţălu, Ş. Ţălu, 3D modeling of a shrink fitted concave ended cylindrical tank for automotive industry. Acta Technica Corviniensis: Bulletin of Engineering, 6 (4), 87-92 (2013) [Google Scholar]
  16. Wojciech czyżycki modeling of heat flow through multilayer internal supports of cryogenic vessels, Technical transportations, 2, 27–34 (2015) [Google Scholar]
  17. J. Föhr, K. Karttunen, J. Enström, T. Johannesson, T. Ranta, Metal and composite intermodal containers in comparative cold tests with wood chips, Journal of Sustainable Bioenergy Systems, 5 (1), 32-39 (2015) [CrossRef] [Google Scholar]
  18. O. Fomin, Increase of the freight wagons ideality degree and prognostication of their evolution stages, Scientific Bulletin of National Mining State University, 2, 68–76 (2015) [Google Scholar]
  19. O. Fomin, Improvement of upper bundling of side wall of gondola cars of 12-9745 model, Metallurgical and Mining Industry, 1, 45–48 (2015). [Google Scholar]
  20. A. Lovska, Simulation of loads on the carrying structure of an articulated flat car in combined transportation. International Journal of Engineering & Technology, 7 (4.3), 140-146 (2018) [Google Scholar]
  21. O. Lovska, Investigation of the durability of the bearing structure of the tank-container placed on the carriage-platform during the maneuvering cooperation (in Ukrainian), Collection of scientific works of State University of Infrastructure and Technology, 28, 90–98 (2016) [Google Scholar]
  22. Rules for the placement and fastening of goods in wagons and containers when transporting them by railways of the gauge of 1520 mm of the SMGS participating countries (in Russian). Part 1. General provisions. OSJD, 681 (2012) [Google Scholar]
  23. Y. Krivovyazyuk, Estimating the equivalent loading of four-axle rail tank wagons with liquid cargo of different density for longitudinal impacts (in Russian), Tesis of PhD Dnepropetrovsk, 157 (1986) [Google Scholar]
  24. Rules for the transport of dangerous goods, To the agreement on international railway cargo communication, 3, OSJD, 531 (2011) [Google Scholar]
  25. V. Dyakonov, MATHCAD 8/2000: Special directory (in Russian), 592 (St. Petersburg, 2000) [Google Scholar]
  26. D. Kiryanov, Mathcad 13 (in Russian), 608 (St. Petersburg, 2006). [Google Scholar]
  27. A. Alyamovskiy, SolidWorks/COSMOSWorks 2006-2007. Engineering analysis by the finite element method (in Russian), 784 (Moscow, 2007). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.