EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 215 (2018) MATEC Web Conf., 215 (2018) 01024 References
Open Access
Issue
MATEC Web Conf.
Volume 215, 2018
The 2nd International Conference on Technology, Innovation, Society and Science-to-Business (ICTIS 2018)
Article Number 01024
Number of page(s) 4
Section Emerging Technologies and Applied Science
DOI https://doi.org/10.1051/matecconf/201821501024
Published online 16 October 2018
  1. P. C. Sen, Principles of Electrical Machines and Power Electronics. (John Wiley & Sons, 1996). [Google Scholar]
  2. A. Krings, et al. Characteristics comparison and selection guide for magnetic materials used in electrical machines. 2015 IEEE Int. Electr. Mach. Drives Conf. 1152–1157 (2015). doi:10.1109/IEMDC.2015.7409206 [CrossRef] [Google Scholar]
  3. F. Ahmed, E. Ghosh, N. C. Kar, Transient Thermal Analysis of a Copper Rotor Induction Motor using a Lumped Parameter Temperature Network Model. IEEE (2016). [Google Scholar]
  4. I. Boldea, Electric Generators and Motors: An Overwiew. CES Trans. Electr. Mach. Syst. IEEE 1, 12 (2017). [Google Scholar]
  5. Z. Anthony, A Simple Method for Operating the Delta Connection Standard of the 3-phase Induction Motor on Single Phase Supply. IJETT 15, 444–447 (2014). [CrossRef] [Google Scholar]
  6. Z. Anthony, A Simple Method For Operating The Three-Phase Induction Motor On Single Phase Supply ( For Wye Connection Standard ). IJETT 5, 13–16 (2013). [Google Scholar]
  7. Z. Anthony, Equivalent Circuits for the M31D-ZA Motor ‟ s Method ( Case Studies : Currents and Power Factor of the motor ). IJETT 25, 49–52 (2015). [CrossRef] [Google Scholar]
  8. Z. Anthony, E. Erhaneli, B. Busran, A NEW EQUIVALENT CIRCUIT OF THE THREE-PHASE INDUCTION MOTOR ( CASE STUDIES : CURRENT AND POWER FACTOR OF THE MOTOR ). 12, 6967–6974 (2017). [Google Scholar]
  9. Z. Anthony, E. Erhaneli, B. Busran, A New Method for Analyzing the Characteristics of The 3-Phase Induction Motor. in International Conference on Technology, Innovation, and Society (ICTIS) 2017 145–151 (ITP Press, 2016). doi:10.21063/ICTIS.2016.121 [Google Scholar]
  10. H. S. Ju, et al., Efficient Deperming Protocols Based on the Magnetic Properties in Demagnetization Process. IEEE Trans. Magn. 51, (2015). [Google Scholar]
  11. P. Rasilo, U. Aydin, T. P. Holopainen, A. Arkkio, Analysis of iron losses on the cutting edges of induction motor core laminations. Proc. 2016 22nd Int. Conf. Electr. Mach. ICEM 2016 1312–1317 (2016). doi:10.1109/ICELMACH.2016.7732694 [Google Scholar]
  12. K. Bourchas, et al., Influence of cutting and welding on magnetic properties of electrical steels. 2016 XXII Int. Conf. Electr. Mach. 1815–1821 (2016). doi:10.1109/ICELMACH.2016.7732770 [CrossRef] [Google Scholar]
  13. Y. Shlapa, S. Solopan, A. Belous, Effect of Mechano-Chemical Processing in the Synthesis of Weakly Agglomerated Ferromagnetic La 1-x Sr x MnO 3 Nanoparticles on their Properties. IEEE 282–286 (2015). [Google Scholar]
  14. Z. Haisen, Z. Dongdong, W. Yilong, Z. Yang, X. Guorui, Piecewise Variable Parameter Loss Model of Laminated Steel and its Application in Fine Analysis of Iron loss of Inverter-Fed Induction Motors. IEEE 1–8 (2016). [Google Scholar]
  15. D. Herceg, D. Herceg, M. Prsa, Using Padé Approximation in Takács Hysteresis Model. IEEE Trans. Magn. 51, 1–5 (2015). [CrossRef] [Google Scholar]
  16. S. Sobhani, H. Yaghobi, M. Samakoosh, Optimize efficiency and torque in the single-phase induction motor by adjusting the design parameters. 12th Int. Conf. Environ. Electr. Eng. EEEIC 2013 237–241 (2013). doi:10.1109/EEEIC.2013.6549623 [CrossRef] [Google Scholar]
  17. C. Yang, et al., Large Converse Magnetoelectric Properties Without Bias in Composite of Rosen-Type Piezoelectric Transformer and Magnetization-Graded Ferromagnetic Material. IEEE Trans. Magn. 51, 8–11 (2015). [Google Scholar]
  18. M. Dems, K. Komeza, Performance Characteristics of a High-Speed Energy-Saving Induction Motor with an Amorphous Stator Core. IEEE Trans. Ind. Electron. 61, 3046–3055 (2014). [CrossRef] [Google Scholar]
  19. T. R. Gaerke, D. C. Hernandez, The temperature impact of magnetic wedges on TEFC induction motors. IEEE Trans. Ind. Appl. 49, 1228–1233 (2013). [CrossRef] [Google Scholar]
  20. M. Lavanya, P. Selvakumar, D. S. Vijayshangkar, D. C. Easwarlal, Performance analysis of three phase induction motor using different magnetic slot wedges. IEEE 164–167 (2014). [Google Scholar]
  21. I. Petrov, M. Niemela, P. Ponomarev, J. Pyrhonen, Rotor Surface Ferrite Permanent Magnets in Electrical Machines: Advantages and Limitations. IEEE Trans. Ind. Electron. 64, 5314–5322 (2017). [CrossRef] [Google Scholar]
  22. M. M. Dias, et al., Influence of resin type and content on electrical and magnetic properties of soft magnetic composites (SMCs). Powder Technol. 237, 213–220 (2013). [CrossRef] [Google Scholar]
  23. W. Ding, et al., Effect of iron particle size and volume fraction on the magnetic properties of Fe/silicate glass soft magnetic composites. J. Magn. Magn. Mater. 378, 232–238 (2015). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.