| Issue |
MATEC Web Conf.
Volume 215, 2018
The 2nd International Conference on Technology, Innovation, Society and Science-to-Business (ICTIS 2018)
|
|
|---|---|---|
| Article Number | 01023 | |
| Number of page(s) | 4 | |
| Section | Emerging Technologies and Applied Science | |
| DOI | https://doi.org/10.1051/matecconf/201821501023 | |
| Published online | 16 October 2018 | |
Windings Design for Single-phase Induction Motors Base on 4-phase Induction Motor (Case study: identical windings design)
Electrical Engineering Department, Institut Teknologi Padang, Indonesia
* Corresponding author: antoslah@gmail.com
A 1-phase induction motor usually has a complicated windings design which compares to polyphase induction motor. In addition, a large capacitor start is required to operate the motor. It is an expensive way to operate the motor if it compare to polyphase induction motor. So, a new innovation method is required to make the motor more simple and cheaper. This research is purposed to study a new winding design for a single-phase capacitor motor. Winding design of the motor was conducted to a simple winding design like a 4-phase induction motor that has four identical windings. The comparator motor that use in this study was a Three-phase induction motor with data 1400 RPM, 1.5 HP, 50Hz, 380/220V, Y/Δ, 2.74/4.7A, 4 poles, that had the same current rating which the proposed method. The result showed that the motor design on this proposed method could be operated at 88.18 % power rating with power factor close to unity.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.