| Issue |
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|
|
|---|---|---|
| Article Number | 02012 | |
| Number of page(s) | 10 | |
| Section | Modelling and Simulation, Structural Optimization | |
| DOI | https://doi.org/10.1051/matecconf/201925402012 | |
| Published online | 15 January 2019 | |
Design and stress analysis of wheeled compactor construction
University of Žilina, Faculty of Mechanical Engineering, Department of Applied Mechanics, Univerzitná 8215/1, Žilina, Slovakia
* Corresponding author: lenka.jakubovicova@fstroj.uniza.sk
The article deals with the design of compactor for a backhoe loader for middle size excavators. Construction of compactor clamp was designed from heavy gauge sheets which will be welded. For expansion of penetrating into thickening soil there were segments designed on drum. From the point of fatigue during comparison of reached maximal tensions and comparison of these values for several loaded alternatives from Wöhler curve was defined static safety factor.
Key words: subsoil compaction / static analysis / modal analysis / FEM / Ansys Workbench
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.