| Issue |
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|
|
|---|---|---|
| Article Number | 02024 | |
| Number of page(s) | 8 | |
| Section | Modelling and Simulation, Structural Optimization | |
| DOI | https://doi.org/10.1051/matecconf/201925402024 | |
| Published online | 15 January 2019 | |
Modification of the optimization model for simulation of large-diameter pipes bending
University of Žilina, Faculty of Mechanical Engineering, Department of Applied Mechanics, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic
* Corresponding author: marian.handrik@fstroj.uniza.sk
This paper presents a modification of the existing optimalization model in order to increase the accuracy of the solution in the initial and the end part of the bend. Developed optimalization algorithms are implemented in the program MATLAB, and the simulation of the bending process is solved in the FEM program ADINA. Created optimisation program automatically generate model for FEM analysis and automaticaly analyses obtained results from FEM analysis.
Key words: Finite element method / pipe bending / pipe tickness / induction heating / splay cooling
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.