Open Access
Issue
MATEC Web of Conferences
Volume 27, 2015
2015 4th International Conference on Engineering and Innovative Materials (ICEIM 2015)
Article Number 02003
Number of page(s) 5
Section Novel materials and properties
DOI https://doi.org/10.1051/matecconf/20152702003
Published online 20 October 2015
  1. M. Abtew, G. Selvaduray, Materials Science and Engineering 27, 19–141 (2000) [Google Scholar]
  2. G. Humpston, D. M. Jacobson, Materials Park Ohio, 1–47 (2004) [Google Scholar]
  3. C.L. Ning, Newnes, an imprint of Butterworth-Heinemann, (2002) [Google Scholar]
  4. D.C. Whalley, Journal of Materials Processing Technology 150, 134–144 (2004) [CrossRef] [Google Scholar]
  5. J. Shen, Y.C. Chan, Microelectronics Reliability 49, 223–234 (2009) [CrossRef] [Google Scholar]
  6. G. Lili, B.X. Song, Z. Liang, S. Zhong, J. Feng, D. Wei, Y. Sheng-lin, Z. Guang, Microelectronic Engineering 87, 2025–2034 (2010) [CrossRef] [Google Scholar]
  7. A. Kar, G. Mainak, N.G. Rabindra, S.M. Bhaskar, K.R Ajoy, Materials Letters 62, 151–154 (2008) [CrossRef] [Google Scholar]
  8. T.C. Hong, W. Chunqing, L. Mingyu, T. Dewen, J. Mater. HSci. Technol. 23, (2007) [Google Scholar]
  9. T. Laurila, V. Vuorinen, SciTopics, Retrieved April 16, 2012 [Google Scholar]
  10. A.S.M.A. Haseeb, M.M. Arafat, R.J. Mohd, Materials Characterization 64, 27–35 (2012) [CrossRef] [Google Scholar]
  11. T. Fouzder, S. Ismathullakhan, Y.C. Chan, A. Sharif, K.C.Y. Winco, Journal of Alloys and Compounds 509, 1885–1892 (2011) [CrossRef] [Google Scholar]
  12. R. Patrick, N. Grace, H.R. Greg, H. Robert, P. Swaminath, C. Flynn, G. Alexander, APEX (2001) [Google Scholar]
  13. A.A. El-Daly, Y. Swilem, M.H. Makled, M.G. El-Shaarawy, A.M. Abdraboh, Journal of Alloys and Compounds 484, 134–142 (2009) [CrossRef] [Google Scholar]
  14. Z. Jian, S. Yangshan, X. Feng, Journal of Alloys and Compounds 397, 260–264 (2005) [CrossRef] [Google Scholar]
  15. E.M.N. Ervina, M.S. Nurulakmal, K.Y. Cheong, A. Tadashi, B.I. Ahmad, H. Zuhailawati, Journal of Alloys and Compounds 507, 290–296 (2010) [CrossRef] [Google Scholar]
  16. L.Q. Zhao, W. Xiu-min, W. Lai, Journal of Alloys and Compounds 375, 196–201 (2004) [CrossRef] [Google Scholar]
  17. A.A. El-Daly, A.E Hammad, Journal of Alloys and Compounds 509, 8554–8560 (2011) [CrossRef] [Google Scholar]
  18. L.L. Duan, D.Q. Yu, S.Q. Han, H.T. Ma, L. Wang, Journal of Alloys and Compounds 381, 202–207 (2004) [CrossRef] [Google Scholar]
  19. E.M.N. Ervina, A. Singh, 35th International Electronics Manufacturing Technology, 59 (2012) [Google Scholar]
  20. R. Mayappan, Z.A. Ahmad, Intermetallics 18, 730–735 (2010) [CrossRef] [Google Scholar]
  21. T.Y. Kang, Y.Y. Xiu, J.J. Wang, W.P. Tong, C.Z. Liu, J. Mater. Sci. Technol. 27, 741–745 (2011) [CrossRef] [Google Scholar]
  22. L. Shen, S. Pradita, C. Zhong, Materials Science & Engineering A 558, 253–258 (2012) [CrossRef] [Google Scholar]
  23. J. Chriastelova, M. Ozvold, Journal of Alloys and Compounds 457, 323–328 (2008) [CrossRef] [Google Scholar]
  24. A. Mansur, F. Tama, A. Sharif, K.G. Asit, Y.C. Chan, Microelectronics Reliability 50, 1134–1141 (2010) [CrossRef] [Google Scholar]
  25. W.M. Chen, S.K Kang, C.R Kao, Journal of Alloys and Compounds 520, 244–249 (2012) [CrossRef] [Google Scholar]
  26. M.R. Harrison, J.H. Vincent, H.A.H Steen, Soldering and Surface Mount Technology 13, 21–38 (2001) [CrossRef] [Google Scholar]
  27. C.L. Chuang, L.C. Tsao, H.K Lin, L.P Feng, Materials Science & Engineering A 558, 478–484 (2012) [CrossRef] [Google Scholar]
  28. S.Y. Chang, C.C. Jain, T.H. Chuang, L.P. Feng, L.C. Tsao, Materials and Design 32, 4720–4727 (2011) [CrossRef] [Google Scholar]
  29. L.C. Tsao, S.Y. Chang, C.I. Lee, W.H. Sun, C.H. Huang, Materials and Design 31, 4831–4835 (2010) [CrossRef] [Google Scholar]
  30. L.C. Tsao, S.Y. Chang, Materials and Design 31, 990–993 (2010) [CrossRef] [Google Scholar]
  31. H.R. Kotadia, O. Mokhtaria, M.P. Clode, M.A Green, S.H Mannan, Journal of Alloys and Compounds 511, 176–188 (2012) [CrossRef] [Google Scholar]
  32. M. Zequn, A.H. Helen, A.V.P Hubert, Low-Temperature Solders Hewlett-Packard, (1996) [Google Scholar]
  33. R.M. Shalaby, Journal of Alloys and Compounds 505, 113–117 (2010) [CrossRef] [Google Scholar]
  34. P. Lobry, L. Blaz, M. Sugamata, A. Kula, International Scientific Journal 49, (2011) [Google Scholar]
  35. L. Zhang, W.H. Cheng, H.G. Yong, G.H. Ji, W.Z. Yong, Y.W Xu, Microelectronics Reliability 52, 559–578 (2012) [CrossRef] [Google Scholar]
  36. F.X. Che, W.H. Zhu, S.W.P. Edith, Zhang X.W., Zhang X.R, Journal of Alloys and Compounds 507, 215–224 (2010) [CrossRef] [Google Scholar]
  37. D.Q. Yu, J. Zhao, L. Wang, Journal of Alloys and Compounds 376, 170–175 (2004) [CrossRef] [Google Scholar]
  38. W.Y Jeong, I.N. Bo, K.K. Bong, C.S. Chang, B.J Seung, Journal of Alloys and Compounds 486, 142–147 (2009) [CrossRef] [Google Scholar]
  39. J. Keller, D. Baither, U. Wilke, G. Schmitz, Acta Materialia 59, 2731–2741 (2011) [CrossRef] [Google Scholar]
  40. J. Gong, L. Changqing, P.C. Paul, V.S Vadim, Scripta Materialia 60, 333–335 (2009) [CrossRef] [Google Scholar]
  41. S. Wiese, K.J Wolter, Microelectronics Reliability 44, 1923–1931 (2004) [CrossRef] [Google Scholar]
  42. L.C. Tsao, C.H. Huang, C.H Chung, R.S Chen, Materials Science and Engineering A 545, 194–200 (2012) [CrossRef] [Google Scholar]
  43. E.D. George, Copyright Mechanical Metallurgy, Mcgraw-Hill Book Company UK Limited, (1988) [Google Scholar]
  44. E.M.N. Ervina, S. Amares, T.C Yap, Soldering & Surface Mount Technology 25, (2013) [Google Scholar]
  45. H.J. Lin, T.H Chuang, Journal of Alloys and Compounds 500, 167–174 (2010) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.