Open Access
| Issue |
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|
|
|---|---|---|
| Article Number | 04008 | |
| Number of page(s) | 10 | |
| Section | Advanced Industrial, Automotive and Green Energy Applications | |
| DOI | https://doi.org/10.1051/matecconf/201925404008 | |
| Published online | 15 January 2019 | |
- K. Vasilko, Technológia dokončovania povrchov. Prešov, Slovenská republika: Technická univerzita v Košiciach, Fakulta výrobných technológií so sídlom v Prešove 124 (1), 115 (2004), ISBN 80 8073 [Google Scholar]
- T. Zlámal, Příspěvek k obrábění Ni superslitiny a hodnocení řezivosti vybraných řezných materiálů. Ostrava, 108 s. Disertační práce. VŠB – Technická univerzita Ostrava. Školitel: doc. Ing. Robert ČEP, Ph.D, (2015) [Google Scholar]
- N. Grossi, Accurate and fast measurement of specific cutting force coefficients changing with spindle speed. Inter-national Journal of Precision Engineering and Manufacturing 18 (8), 1173-1180 (2017) [CrossRef] [Google Scholar]
- C. Yao, Z. Zhou, J. Zhang, D. Wu, L. Tan, Experimental study on cutting force of face-turning Inconel718 with ceramic tools and carbide tools, Advances in Mechanical Engineering 9 (7), 1-9 (2017) [Google Scholar]
- E. Turkes, S. Orak, S. Neseli, M. Sahin, S. Selvi, Modelling of dynamic cutting force coefficients and chatter stability dependent on shear angle oscillation. International Journal of Advanced Manufacturing Technology 91 (1-4), 679-686 (2017) [CrossRef] [Google Scholar]
- E. Brinksmeier, W. Preuss, O. Riemer, R. Rentsch, Cutting forces, Tool wear and surface finish in high speed diamond machining. Precision Engineering 49, 293-304 (2017) [CrossRef] [Google Scholar]
- J. Zajac, J. Jurko, R. Čep, Top trendy v obrabani, II cast Nastrojove materialy. Zilina: Media/St, s.r.o. Zilina, 193 (2006), ISBN 80-968954-2-7 [Google Scholar]
- M. Neslušan, Experimentálne metódy v trieskovom obrábaní. 1. vyd. Žilina: Žilinská univerzita v Žiline, 349 (2007), ISBN 978-80-8070-711-8 [Google Scholar]
- J. Petrů, T. Zlámal, R. Čep, M. Pagáč, M. Grepl, Influence of Strengthening Effect on Machinability of the Welded Inconel 625 and of the Wrought Inconel 625. In IMETI 2013 Procedings of the 6th International Multi-Conference on Engineering and Technological Innovation, USA, Florida, Orlando, 9th – 12th July 2013. Orlando : International Institute of Informatics and Systematics, 1st edition + proceedings on CD, 1-5 (2013) [Google Scholar]
- M. Neslušan, A. Czán, Obrabanie titanovych a niklovych zliatin. Zilina: Zilinska univerzita v Ziline / EDIS, 189 (2001), ISBN 80-7100-933-4 [Google Scholar]
- D. Stančeková, M. Drbúl, M. Janota, N. Náprstková, A. Kulla, J. Mrazik, Influence of manufacturing parameters on final quality of lapped parts. Manufacturing Technology 16 (1), 253-259 (2016) [Google Scholar]
- A. Humár, TECHNOLOGIE I: Technologie obrábění 1.část [online]. [cit. 2016-02-10]. Available from: http://ust.fme.vutbr.cz/obrabeni/opory-save/TI_TO-1cast.pdf [Google Scholar]
- G. M. Krolczyk, P. Neislony, S. Legutko, Determination of tool life and research wear during duplex stainless steel turning, Archives of Civil and Mechanical Engineering 15 (2), 347-354 (2015) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.