| Issue |
MATEC Web Conf.
Volume 161, 2018
13th International Scientific-Technical Conference on Electromechanics and Robotics “Zavalishin’s Readings” - 2018
|
|
|---|---|---|
| Article Number | 03007 | |
| Number of page(s) | 5 | |
| Section | Robotics and Automation | |
| DOI | https://doi.org/10.1051/matecconf/201816103007 | |
| Published online | 18 April 2018 | |
Implementation of impedance trajectory control on a 6-DoF manipulator
Russian State Scientific Center for Robotics and Technical Cybernetics (RTC), 194064, 21 Tikhoretsky Prospect, Saint-Petersburg, Russia
* Corresponding author: i.shardyko@rtc.ru
Aiming at enhancing the performance of a robotic system, i.e. of a robot manipulator, it is extremely important to ensure the safety of its functioning and the convenience of operating it. Special attention is required if there is a possibility of a collision, especially with costly equipment or with a person. Among the different means and approaches to prevent or react to such situations, implementation of forcetorque control is considered in this paper. A trajectory task is analysed and an impedance control law is employed to achieve the desired robot behaviour. The effectiveness of the approach has been verified by using a 6-DoF elbow manipulator to perform two types of operations: a peg-in-hole task and path execution with obstacles on the way.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.