MATEC Web of Conferences

Open Access

Technology and electrophysical properties of Mn⁴⁺, Sb³⁺, Dy³⁺ and W⁶⁺ -doped Pb(Zr_0.49Ti_0.51)O₃ ceramics 01001

Dariusz Bochenek, Ćwikiel Ewa, Przemysław Niemiec and Tomasz Goryczka

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201001

• Abstract
• PDF (3.431 MB)
• References

Open Access

Dielectric properties of the PFN ceramics obtained different chemical-wet technology and sintering by hot pressing method 01002

Dariusz Bochenek and Przemysław Niemiec

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201002

• Abstract
• PDF (4.360 MB)
• References

Open Access

Synthesis and structure of BiFeO₃:RE (RE=Gd³⁺, Dy³⁺, Nd³⁺) ceramics 01003

J. Dzik, M. Płońska, T. Pikula and M. Rerak

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201003

• Abstract
• PDF (2.059 MB)
• References

Open Access

Novel carbon fibers reinforced composites based on polysulfone matrix 01004

Dilyus Chukov, Sarvarkhodzha Nematulloev, Andrey Stepashkin, Aleksey Maksimkin, Dmitriy Zherebtsov and Victor Tcherdyntsev

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201004

• Abstract
• PDF (1.165 MB)
• References

Open Access

Modeling of the Formation Processes of Nanocomposite Coatings by the Electrocodeposition 01005

Alexander Vakhrushev, Eugene Molchanov and Alexey Fedotov

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201005

• Abstract
• PDF (1.186 MB)
• References

Open Access

Research on the friction stir welding of Titanium Grade 1 01006

R. Kosturek, M. Wachowski, T. Ślęzak, L. Śnieżek, J. Mierzyński and U. Sobczak

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201006

• Abstract
• PDF (1.257 MB)
• References

Open Access

The effects of the heat treatment on the microstructure of Inconel 625/steel bimetal joint obtained by explosive welding 01007

R. Kosturek, M. Wachowski, L. Śnieżek, M. Gloc and U. Sobczak

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201007

• Abstract
• PDF (1.553 MB)
• References

Open Access

An effective methodology to design scale model of non-metallic structural entity 01008

Liming Yuan, Zhijie Xie, Fei Dai, Yonggang Xu and Yuan Zhang

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201008

• Abstract
• PDF (1018 KB)
• References

Open Access

The spheroidizing tendency and spheroidization mechanism of 75Cr1 steel 01009

Jiping Huo, Chong Zhou and Hua Wang

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201009

• Abstract
• PDF (1.444 MB)
• References

Open Access

Prediction and verification of the single cladding layer thickness for laser solid forming 01010

Jun-hua Wang, Fu-zhu Han and Wei-sheng Ying

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201010

• Abstract
• PDF (1.951 MB)
• References

Open Access

Analysis of crack mechanism in FGH 98 superalloy during the laser solid forming process 01011

Weisheng Ying, Shukai Fan, Fuzhu Han and Junhua Wang

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201011

• Abstract
• PDF (1.177 MB)
• References

Open Access

Design and Simulation Analysis of Micro-Porous Structure in Infiltration-Type Self-Lubrication Composites Matrix 01012

Han Ying

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201012

• Abstract
• PDF (1.079 MB)
• References

Open Access

The priority classification method of mobile users under direct power transaction 01013

Wang Lei, Gao Chuncheng, Zhang Qian and Dai Yong

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201013

• Abstract
• PDF (1.180 MB)
• References

Open Access

Seismic retrofit of historical masonry walls by means of natural basalt fiber strips system (BFRP). Pre-modern concepts and innovative materials 01014

Giacomo Tempesta

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201014

• Abstract
• PDF (1.072 MB)
• References

Open Access

Simultaneous Determination of Three Effective Components in Different Compatibility Proportion of the Couple of Sophora flavescens-Fructus Ligustri lucidi by HPLC 01015

Shuhan Chu, Hongxu Zhang and Lixin Ding

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201015

• Abstract
• PDF (1.054 MB)
• References

Open Access

Peculiarities of the use of siliceous raw materials of the Russian Far East in the integrated pipeline protection 01016

Elena A. Yatsenko, Boris M. Goltsman, Anna V. Ryabova and Victoria A. Smoliy

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201016

• Abstract
• PDF (1.644 MB)
• References

Open Access

The influence of surface opening cracks on the ultrasonic waves near the surface in concrete members 01017

Wan-Yue Zheng, Qing-bang Han and XUE-ping Jiang

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201017

• Abstract
• PDF (1.749 MB)
• References

Open Access

Application of Python language in UOE molding simulation of pipeline steel 01018

Lian Yeda, Zhang Bing and Wu Renqiang

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201018

• Abstract
• PDF (1.622 MB)
• References

Open Access

Design and trial-produce of a special nail-tooth thresher for pulses crops 01019

Xianfei Xia, Qiaomin Chen, Hongru Xiao and Guang Yang

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201019

• Abstract
• PDF (1.901 MB)
• References

Open Access

Timber “Science” in Herculaneum during the 1^st Century A.D. 01020

Nicola Ruggieri

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201020

• Abstract
• PDF (1.922 MB)
• References

Open Access

Antifungal Property of Piper betle Leaf Oil against Oral Candida Species 01021

Rattiporn Kaypetch and Sroisiri Thaweboon

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201021

• Abstract
• PDF (1.653 MB)
• References

Open Access

Finite element simulation and microstructure analysis of nickel based alloy for additive manufacturing 01022

Liu Heping, Sun Fenger, Yibo Fenger, Cheng Shaolei and Liu Bin

Published online: 05 December 2018

DOI: https://doi.org/10.1051/matecconf/201824201022

• Abstract
• PDF (1.094 MB)
• References