EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 242 (2018) MATEC Web Conf., 242 (2018) 01014 References
Open Access
Issue
MATEC Web Conf.
Volume 242, 2018
International Conference on Advanced Functional Materials and Composites (ICAFMC2018)
Article Number 01014
Number of page(s) 5
Section Carbon Composites
DOI https://doi.org/10.1051/matecconf/201824201014
Published online 05 December 2018
  1. P. Vitruvio, Dieci Libri di Architettura, Libro II Cap. X, T. Carunchio (Ed.), Bardi, Roma (2006) [Google Scholar]
  2. N. Ruggieri, S. Galassi, G. Tempesta, Pompeii’s Stabian Baths. Mechanical behaviour assessment of selected masonry structures during the 1st century seismic events, Int. J. Archit. Herit. 12, 5, 859–878 (2018) 10.1080/15583058.2017.1422571 [CrossRef] [Google Scholar]
  3. N. Ruggieri, Timber “Science” in Herculaneum (Italy) during the 1st century A.D., Materials Science Forum (ISSN: 0255-5476), Trans Tech Publications, Proc. of 4th International Conference on Mechanical Structures and Smart Materials (4th ICMSSM2018) (22-23 September 2018, Shenzhen, China) [Google Scholar]
  4. A. Amoroso, M. Bianchini, F. Di Gennaro, F. Fraioli, M. Merlo, Strutture semipogee nell’ager Fidenatis, in: Suburbium, 2. Il suburbio di Roma dalla fine dell’età monarchica alla nascita del sistema delle ville (V-II secolo a.c.), Roma 2009, pp. 347–367 [Google Scholar]
  5. R. Langenbach, Learning from the past to protect the future: Armature crosswalls, Eng. Struct. 30, 8 2096–2100 (2008) 10.1016/j.engstruct.2008.04.028 [CrossRef] [Google Scholar]
  6. R. Langenbach, Crosswalls instead of shearwalls: a proposed research project for the retrofit of vulnerable concrete buildings in earthquake areas based on traditional himis construction, Proc. of the Turkish 5th National Conference on Earthquake Engineering (26-30 May 2003, Istambul, Turkey) [Google Scholar]
  7. E. Poletti, G. Vasconcelos, Seismic performance of traditional half-timbered walls: experimental results, pp. 53–66, in: Ruggieri N., Tampone G., Zinno R. (Eds), Historical Hearthquake-Resistant Timber Frames in the Mediterranean Area, Springer, Cham, 2015, pp. 95–103 (2013) 10.1007/978-3-319-16187-7 [Google Scholar]
  8. S. Galassi, N. Ruggieri, G. Tempesta, Seismic performance evaluation of timber-framed masonry walls. Experimental tests and numerical modelling, in: Ruggieri N., Tampone G., Zinno R. (Eds), Historical Hearthquake-Resistant Timber Frames in the Mediterranean Area, Springer, Cham, 2015, pp. 95–103, Proc. of 1st International Symposium on Historic Earthquake-Resistant Timber Frames in the Mediterranean Area, Cosenza, Italy (4-5 November 2013) 10.1007/978-3-319-16187-7_8 [Google Scholar]
  9. S. Galassi, N. Ruggieri, G. Tempesta, A novel numerical tool for seismic vulnerability analysis of ruins in archaeological sites, Int. J. Archit. Herit. (2018), 10.1080/15583058.2018.1492647 [Google Scholar]
  10. S. Galassi, N. Ruggieri, G. Tempesta, Ruins and archaeological artifacts: vulnerabilities analysis for their conservation through the original computer program BrickWORK, in: Aguilar, R., Torrealva, D., Moreira, S., Pando, M., Ramos, L.F. (Eds.), Structural Analysis of Historical Constructions, RILEM bookseries 18, Springer International Publishing, pp. 1839–1848 (2018) 10.1007/978-3-319-99441-3_197, Proc. of 11th International Conference on structural analysis of historical constructions (SAHC2018)(11-13 September 2018, Cusco, Perù). [Google Scholar]
  11. S. Galassi, M. Paradiso, BrickWORK Software-Aided Analysis of Masonry Structures, IERI Procedia 7, 62–70 (2014), Special Issue 2013 International Conference on Applied Computing, Computer Science, and Computer Engineering (ICACC 2013), USA, December 2013, Elsevier B.V., ISSN: 2212-6678, 10.1016/j.ieri.2014.08.011 [Google Scholar]
  12. S. Galassi, G. Misseri, L. Rovero, G. Tempesta, Equilibrium analysis of masonry domes. On the analytical interpretation of the Eddy-Lévy graphical method, Int. J. Archit. Herit. 11, 8, 1195–1211 (2017) 10.1080/15583058.2017.1372823 [Google Scholar]
  13. S. Galassi, G. Tempesta, Analysis of Masonry Block Structures with Unilateral Frictional Joints, in: Proc. Int. Conf. on Electronic, Control, Automation and Mechanical Engineering (ECAME 2017), 19-20 November 2017, Sanya, China, DEStech Transactions on Engineering and Technology Research, 246–51, 10.12783/dtetr/ecame2017/18396 [Google Scholar]
  14. F. Pugi, S. Galassi, 2013 Seismic analysis of masonry voussoir arches according to the Italian building code, Ing. Sismica-Ital. 30,3, 33–55 (2013) [Google Scholar]
  15. S. Galassi, G. Misseri, L. Rovero, G. Tempesta, Failure modes prediction of masonry voussoir arches on moving supports, Eng. Struct. 173, 706-717 (2018) 10.1016/j.engstruct.2018.07.015 [CrossRef] [Google Scholar]
  16. M. Paradiso, S. Galassi, S. Benedetti, Stabilità di archi e volte in muratura: metodi tradizionali e calcolo automatico, in: Luis Villegas, Ignacio lombillo, Clara Liano, Haydee Blanco (Eds.), Patologia della Costruccion, Tecnologia de la Rehabilitacion y Gestion del Patrimonio, Proc. Conf Latinoamericano Patologie del costruito, tecniche di riabilitazione e gestione del patrimonio (Rehabend 2014), Santander, Spain, Gráficas Iguña, S.A. (2014) [Google Scholar]
  17. M. Paradiso, S. Galassi, S. Benedetti, Il caratteristico Forte di San Fernando de Bocachica, Colombia, in: Luis Villegas, Ignacio lombillo, Clara Liano, Haydee Blanco (Eds.), Patologia della Costruccion, Tecnologia de la Rehabilitacion y Gestion del Patrimonio, Proc. Conf. Latinoamericano Patologie del costruito, tecniche di riabilitazione e gestione del patrimonio (Rehabend 2014), Santander, Spain, Gráficas Iguña, S.A. (2014) [Google Scholar]
  18. S. Galassi, L. Dipasquale, N. Ruggieri, G. Tempesta, Andalusian timber roof structure in Chefchaouen, Northern Morocco: construction technique and structural behavior, J. Archit. Eng. 24, 3, 04018012(2018) 10.1061/(ASCE)AE.1943-5568.0000315 [CrossRef] [Google Scholar]
  19. S. Galassi, N. Ruggieri, L. Dipasquale, G. Tempesta, Assessment of the Moroccan Vernacular Timber Roof: a Proposal for an Eco-Friendly Strengthening System, J. Architectural Conservation (in press). [Google Scholar]
  20. M. Paradiso, S. Galassi, A. Borri, D. Sinicropi, “Reticolatus”: an innovative reinforcement for irregular masonry. A numeric model, in: Paulo J. S. Cruz (Ed.), Structures and Architecture: Concepts, Applications and Challenges, CRC Press/ Balkema,Taylor and Francis Group, London, Proc. 2nd Int. Conf. on Structure & Architecture ICSA2013, Guimaraes, Portugal (2013) [Google Scholar]
  21. M. Corradi, A. Borri, G. Castori, R. Sisti, The Reticulatus method for shear strengthening of fairfaced masonry, Bulletin of Earthquake Engineering 14, 12, 3547–3571 (2016) 10.1007/s10518-016-0006-5 [CrossRef] [Google Scholar]
  22. D. Sinicropi, E. Perria, S. Galassi, M. Paradiso, A. Borri, Artificial Ageing of Mortar Prisms Reinforced through Steel, Glass and Organic Fibers, Journal of Key Eng. Mat., A. Di Tommaso, C. Gentilini and G. Castellazzi (Eds.) 624, 4, 542–50 (2014)10.4028/www.scientific.net/KEM.624.542 [CrossRef] [Google Scholar]
  23. S. Galassi, A numerical procedure for failure mode detection of masonry arches reinforced with fiber reinforced polymeric materials, IOP Conf. Ser.: Mater. Sci. Eng. 369, 012038 (2018) 10.1088/1757-899X/369/1/012038, Proc. of 5th Global Conference on Polymer and Composite Materials (PCM 2018) (10-13 April 2018, Kitakyushu City, Japan) [Google Scholar]
  24. S. Galassi, Analysis of masonry arches reinforced with FRP sheets: experimental results and numerical evaluations, MATEC Web of Conferences 207: 01002, 10.1051/matecconf/201820701002, Proc. of International Conference on Metal Material Processes and Manufacturing (ICMMPM2018) (19-20 July 2018, Jeju Island, South Korea) [Google Scholar]
  25. A. Borri, G. Castori, M. Corradi, Intrados strengthening of brick masonry arches with composite materials, Compos. Part B-Eng. 42, 5, 1164–1172 (2011) 10.1016/j.compositesb.2011.03.005 [CrossRef] [Google Scholar]
  26. G. Castori, A. Borri, M. Corradi, Behavior of thin masonry arches repaired using composite materials, Compos. Part B-Eng. 87, 311-321 (2016) 10.1016/j.compositesb.2015.09.008 [CrossRef] [Google Scholar]
  27. A. Borri, G. Castori, M. Corradi, Strengthening of thin masonry arches, Key Eng. Mat. 624, 51–58 (2015) 10.4028/www.scientific.net/KEM.624.51 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.