Open Access
| Issue |
MATEC Web Conf.
Volume 388, 2023
2023 RAPDASA-RobMech-PRASA-AMI Conference Advanced Manufacturing Beyond Borders - The 24th Annual International RAPDASA Conference joined by RobMech, PRASA and AMI, hosted by CSIR and CUT
|
|
|---|---|---|
| Article Number | 05002 | |
| Number of page(s) | 9 | |
| Section | Product Design and Development | |
| DOI | https://doi.org/10.1051/matecconf/202338805002 | |
| Published online | 15 December 2023 | |
- Linke, R. (2017) ‘Additive manufacturing, explained’, https://mitsloan.mit.edu/ideas-made-to-matter/additive-manufacturing-explained. [Google Scholar]
- Freemer, T. (2023). ‘What is Metal Additive Manufacturing? An in-depth guide ’, https://www.alphaprecisionpm.com/blog/what-is-metal-additive-manufacturing [Google Scholar]
- Sing, S.L. and Yeong, W.Y. (2020) 'Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments,' Virtual and Physical Prototyping, 15(3), pp. 359–370. https://doi.org/10.1080/17452759.2020.1779999. [CrossRef] [Google Scholar]
- Angrish, A. (2014) ‘A critical analysis of additive manufacturing technologies for aerospace applications,’ 2014 IEEE Aerospace Conference, Mar. 2014, pp. 1–6. [Google Scholar]
- Shapiro, A.A. et al. (2016) 'Additive manufacturing for aerospace flight applications,' Journal of Spacecraft and Rockets, 53(5), pp. 952–959. https://doi.org/10.2514/1.a33544. [CrossRef] [Google Scholar]
- Wiberg, A., Persson, J. and Ölvander, J. (2019) 'Design for additive manufacturing – a review of available design methods and software,' Rapid Prototyping Journal, 25(6), pp. 1080–1094. https://doi.org/10.1108/rpj-10-2018-0262. [CrossRef] [Google Scholar]
- Engineering Product Designhttps. (n.d.). ‘Introduction to Topology Optimization,’ https://engineeringproductdesign.com/knowledge-base/topology-optimization/#what-is-topology-optimization [Google Scholar]
- NASA Technical Standard. (2021). NASA-STD-6030. ‘Additive Manufacturing requirements for spaceflight systems,’ NASA [Google Scholar]
- American Society for Testing Materials. (2017). ISO/ASTM 52910:2017(E). ‘Standard guidelines for Design for Additive Manufacturing,’ ISO/ASTM [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.